FAB063026XAENGB- -  -  N- Bulb Flat Sections,grades A - AH36 - DH36 -N- S- S- -29/04/2026- Fabbricanti Approvati- - SN- N- Agustin Leandro Ibarra- S-  - 875,090Agustin Leandro IbarraBbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB063026XA- N-Jan 25, 2031875090
 
Form
  Fabbricanti Approvati(TO)
FAB063026XA
Certification N. FAB063026XA - (ENG)
Certificate date 29/04/2026
Type Approvazione di fabbricanti di materiali
Product Lamiere e profilati da scafo in acciaio ordinario e ad elevata resistenza

Model or Denomin.
Items
Bulb Flat Sections,grades A - AH36 - DH36
Applicant
Standards RINA Rules for the approval of manufacturers of materials
Expire date 25/01/2031
Responsible Office BARCELONA
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. 2026/XA/01/630
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Normal strength and higher strength hull steel plates and sections
Type Bulb Flat Sections; grades A - AH36 - DH36
Applicant LAMINADOS LOSAL S.A.
BEKOIBARRA, 9 - P.O. BOX 17
48300 GERNIKA
SPAIN
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until January 25, 2031
_________________________________
RINA Services S.p.A.


(See attached file: Agustin L. Ibarra.JPG)
Agustin Leandro Ibarra
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. 2026/XA/01/630
Enclosure - Page 1 of 1
Bulb Flat Sections,grades A - AH36 - DH36

APPROVAL CONDITIONS



Steel making process: billets are to be produced by approved steel works, fully killed steel.

- Condition of supply: As rolled

- Dimensions: from 60X4 to 180X10 mm

Steel grade
Deoxidation practice and
fine grained element
Delivery condition and max. thickness
A, AH36, DH36
Killed
As rolled - 10mm

Survey condition: the products are to be in compliance in all respects with the relevant RINA Rules and
are to be tested accordingly
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

BARCELONA April 29, 2026
**** NOTICE: This is NOT an official certificate ****