MED102123XPENGB- -  -  N- Seaprotector II -N- S- S- -25/08/2023- Marine Equipment- - SN- S- - N-  - 1,209,630B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED102123XP- N-Aug 24, 20281209630
 
Form
  Marine Equipment(TO)
MED102123XP
Certification N. MED102123XP - (ENG)
Certificate date 25/08/2023
Type Protezione antincendio
Product Fire-fighter's outfit: protective clothing (close proximity clothing): (c) Protective clothing for firefighting: Protective clothing with a reflective outer surface
Item Nº MED/3.3c

Model or Denomin.
Items
Seaprotector II
Applicant Pflüger Safety GmbH & Co. KG
Place of requester Havelstrasse 28  %  24539 Neumünster  % GERMANY
Tel. N.,Fax, Email +49 4321 8974, ---, pflueger@pfluegerhp.de
Directive (EU) 2022/1157
Standards ISO 15538:2001
Reference Documents SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7, IMO Res.MSC.98(73)-(FSS Code) 3.
Expire date 24/08/2028
Responsible Office Gdańsk
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jaroslaw Kondracki S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED102123XP

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.3c
Description Fire-fighter's outfit: protective clothing (close proximity clothing): (c) Protective clothing for firefighting: Protective clothing with a reflective outer surface
Type Seaprotector II
Applicant Pflüger Safety GmbH & Co. KG
Havelstrasse 28,24539 Neumünster,GERMANY
Testing standards ISO 15538:2001
Reference standards SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7, IMO Res.MSC.98(73)-(FSS Code) 3.
Issued in Gdańsk on
This Certificate is valid until
August 25, 2023
August 24, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Jaroslaw Kondracki
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED102123XP
Page 1 of 2
Product description
“Seaprotector II” the heat protective suit is a two-piece garment made of viscose FR fabric with aluminium lamination consisting of:
- A jacket and separate trousers with elastic braces,
- Leather gloves,
- Safety boots,
- Heat resistance zipper,
- Helmet

Sizes : L,XL, XXL, XXXL
Colour: aluminium silver

Application
Approved as a protective clothing for firefighting with a reflective outer surface in accordance with ISO 15538:2001 Level II
The two-piece garment is composed by a jacket and trousers.
Both must be worn together and must be used in combination with MED approved boots, gloves and helmet to provide the required protection.

Use and restrictions according to manufacturer´s instructions with the appropriate equipment such as self-contained breathing apparatus.
Each protective suit is to be supplied with its manual for use and maintenance.

Reference Documents
- Technical data sheet filled by RINA with No. PLFP/2607,
- The material data sheet filled by RINA with No. PLFP/2608,
- Risk assessment dated 14/07/2023 filled by RINA with No. PLFP/2609,
- EC Declaration of Conformity filled by RINA with No. PLFP/2605.

Tests report
Tested in accordance with ISO 15538:2001 Level II filled by RINA with No. PLFP/2606.

Marking of product
The product is to be indelibly marked with name and address of the manufacturer, type designation, ISO 15538:2001 Level 2, batch or serial number (or other elements allowing their identification) and the year of manufacturing. The marking to comply with ISO 15538:2001 item 9.




ATTACHMENT TO
CERTIFICATE No. MED102123XP
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Jaroslaw Kondracki
**** NOTICE: This is NOT an official certificate ****