MED005923CS!003ENGB- -  -  N- A60 Window Int fire HS -N- S- S- -20/03/2023- Marine Equipment- - SN- S- - N-  - 342,694B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED005923CS/003- N-Mar 18, 2028342694
 
Form
  Marine Equipment(TO)
MED005923CS/003
Certification N. MED005923CS/003 - (ENG)
Certificate date 20/03/2023
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
A60 Window Int fire HS
Applicant Metaalwarenfabriek En Kopergieterij Het Anker B.V.
Place of requester Kaatsbaan 10  %  4209 AD Schelluinen  % NETHERLANDS
Tel. N.,Fax, Email 0031 183 623135, ---, truus@anker-windows.com
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 17/1/2023
Expire date 18/03/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED005923CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type A60 Window Int fire HS
Applicant Metaalwarenfabriek En Kopergieterij Het Anker B.V.
Kaatsbaan 10,4209 AD Schelluinen,NETHERLANDS
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 20, 2023
March 18, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED005923CS/003
Page 1 of 2

Product description

Rectangular window having maximum clear size of 1798x2456 mm (WxH). The glass compound is composed, moving from the side exposed to the fire, of a glass type CONTRAFLAM MARINE A60 CLIMAPLUS (manufacturer Vetrotech) and having total thickness of 30 mm, composed of three glasses and, in between, two layers of intumescing gel, a void space 10 mm deep and a toughened pane having thickness of 8 mm (manufacturer Vetrotech). The frame is composed of a steel profile having height of 100 mm and thickness of 12 mm, welded to the bulkhead on both sides.The glass retaining frame, fitted on the side exposed to the fire and composed of stainless steel flat having thickness of 5 mm and width of 40 mm, is fixed to the frame by means of M6 screws fitted with pitch of 50 mm; between the frame and the glass retaining frame a layer of neoprene, 12 mm thick, is fitted. Between the glass faces, the frame and the glass retaining frame, ceramics gaskets, 2 mm thick, are fitted. Between the glass edge and the frame, on the lower side, spacers of calcium silicate type PROMATECT H, having thickness of 3 mm, are fitted. The glass panes are sealed by means of silicone type PYROSIL B.
The window may also be produced by Naval Suppliers Srl - Zona Industriale 24 - 33049 San Pietro al Natisone (UD) - Italy.
Field of application
Fire resistant A-60 Class window with fire hazard in the inner side of the application. Hose stream resistant.
In case of installation on ships classified by RINA, the window shall comply to the additional requirements in accordance to RINA Rules.
Reference documents
NAVAL SUPPLIERS - HET ANKER drawing No. FTW-A60-CF-OI-1798x2456 dated 12 January 2018 approved on 9 March 2018 with endorsement No. LABS-1613.
Tests carried out
Tests as per RINA Test Laboratory Laboratory report No. 2017CS013691/2 issued on 9 March 2018 according to IMO 2010 FTP Code Part. 3 Appendix 2 - A.I - Windows.




ATTACHMENT TO
CERTIFICATE No. MED005923CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****