MED907025WSENGF- -  -  N- SRH240 -N- S- S- -23/12/2025- Marine Equipment- - SN- S- - N-  - 1,036,901B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED907025WS- N-Dec 22, 20301036901
 
Form
  Marine Equipment(TO)
MED011826WS
Certification N. MED907025WS - (ENG)
Certificate date 23/12/2025
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
SRH240
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
Place of requester No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City, Zhejiang Province, China
Tel. N.,Fax, Email 0576-89053360, 0576-89053363, nsy888@norsier.com
Directive (EU) 2025/1533
Standards IMO Res.MSC 81(70) as amended
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Expire date 22/12/2030
Head Office SHANG HAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED907025WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type SRH240
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City, Zhejiang Province, China
Testing standards IMO Res.MSC 81(70) as amended
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Issued in SHANG HAI on
This Certificate is valid until
December 23, 2025
December 22, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED907025WS
Page 1 of 2

TECHNICAL DATA


Product Description:

- Maximum Working Load: 240 kN


- Maximum Hoisting Load: 90 kN
- Minimum Launching Load: 70kN
- Arrangement/positioning of launching appliance on board of ship shall be in compliance
with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).

REFERENCE DOCUMENTS

Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-57386 SRH240 Hydraulic Luffing Arm Type Davit (SHST/2025/973/LEIGU), SHST-61461 SRH240 Davit Test Report (SHST/2025/2314/ LEIGU), SHST-55763 Application form, SHST-55359 Risk Assessment.



TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the launching appliance was tested under witnessing of RINA as per Prototype Test Report dated on 19/09/2025.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.
Installation, on board testing, support to the deck structure shall be accepted by attending surveyor.




ATTACHMENT TO
CERTIFICATE No. MED907025WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****