MED013226CS!002ENGB- -  -  N- WallMax Multiple Cable Penetration Transits - WRF and WRFR6 series -N- S- S- -29/01/2026- Marine Equipment- - SN- S- - N-  - 396,753B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED013226CS/002- N-Oct 17, 2027396753
 
Form
  Marine Equipment(TO)
MED013226CS/002
Certification N. MED013226CS/002 - (ENG)
Certificate date 29/01/2026
Type Protezione antincendio
Product Penetrations through "A" Class divisions: (a) electric cable transits
Item Nº MED/3.26a
USCG Category N° 164.138

Model or Denomin.
Items
WallMax Multiple Cable Penetration Transits -  WRF and WRFR6 series
Applicant WALLMAX SRL
Place of requester CORSO DI PORTA NUOVA 22  %  20121 MILANO  % ITALY
Tel. N.,Fax, Email +39 02 36520000, ---, marta.naletto@wallmax.in
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP Code) as amended - IMO MSC.1/Circ. 1488
Reference Documents SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1655
Request 21/01/2026
Expire date 17/10/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED013226CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.26a
USCG Category Nº 164.138
Description Penetrations through "A" Class divisions: (a) electric cable transits
Type WallMax Multiple Cable Penetration Transits -  WRF and WRFR6 series
Applicant WALLMAX SRL
CORSO DI PORTA NUOVA 22,20121 MILANO,ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) as amended - IMO MSC.1/Circ. 1488
Reference standards SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1655
Issued in Genoa on
This Certificate is valid until
January 29, 2026
October 17, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED013226CS/002
Page 1 of 3




Product description

Transits of electric cables, having maximum diameter of 81 mm, installed in A-Class bulkheads and decks. The transits are composed of a steel frame, having thickness of 10 mm and depth of 60 mm, fillet welded, on both sides, to the bulkhead or deck plate. The transits are filled with EPDM modules and, on the upper part, one module fitted with a screw expander is installed. The interstices between the cables and the modules and between the modules, are lubricated by means of product named WallMax Lubricant. The transits are insulated, on both sides, with two layers of mineral wool type SeaRox SL 620, having, each, thickness of 60 mm and density of 100 kg/m3; the mineral wool panels, having dimensions of 400 mm in width and 600 mm (320 mm for frame type WRF 60) in length, are fixed to the bulkhead or deck plate by means of steel pins and washers welded with pitch ranging from 120 up to 200 mm. The certification is valid also for transit types WRF2, WRFD, WRFR2 and WRFR4 and for type WRFO composed of a three-side frame with the fourth side welded afterwards.

Reference documents

WallMax drawing No. 5500001001 Rev. 00 dated 28 June 2017, No. 5500002001 Rev. 00 dated 1 August 2017 and No. 7010102004 Rev. 00 dated 23 June 2017 approved on 20 September 2017, 22 September 2017 and 16 October 2017 respectively with endorsement Nos. LABS-1535, LABS-1537 and LABS-1556.
Tests carried out

Tests as per RINA Test Laboratory Reports No. 2017CS01761/3 dated 20 September 2017 and No. 2017CS01761/6 dated 22 September 2017 issued according to Appendix 1 of IMO 2010 FTPC Part 3 - A.IV Cable Transits.











 



ATTACHMENT TO
CERTIFICATE Nr. MED013226CS/002
Page 2 of 3

Field of application
Fire resistant A-60 Class cable transits through bulkheads and decks as per following tables:

WRF TYPE - BULKHEAD
Transit dimensions (mm)
Minimum fill
%
Maximum fill
%
Cables - Maximum diameter (mm)
140x118
0.08
33.4
50
140x298
0.03
39
81

WRFR6 - BULKHEAD
Transit dimensions (mm)
Minimum fill
%
Maximum fill
%
Cables - Maximum diameter (mm)
140x238
0.04
24.8
50
140x298
0.07
23
81

WRF TYPE - DECK
Transit dimensions (mm)
Minimum fill
%
Maximum fill
%
Cables - Maximum diameter (mm)
140x118
0.08
33.4
50
140x298
0.03
33.5
81

WRFR6 TYPE - DECK
Transit dimensions (mm)
Minimum fill
%
Maximum fill
%
Cables - Maximum diameter (mm)
140x238
0.08
23
50
140x298
0.07
22.5
81
Additional characteristics
WallMax Multiple Cable Penetration Transits – WRF, WRFR6, WRF2, WRFD, WRFR2, WRFR4 and WRFO series are certified also as:
Equipment or Protective System Intended for use in Potentially Explosive Atmospheres in compliance with Directive 2014/34/EU with EU-Type Examination Certificate Number ETL24ATEX0397X issued on 25th September 2024 under the names WRF Ex, WRFR6 Ex, WRF2 Ex, WRFD Ex, WRFR2 Ex, WRFR4 Ex and WRFO Ex;
Increased Safety and Dust ignition Protection by enclosure in compliance with Standard IEC 60079-0:2017, IEC 60079-7:2017 and IEC 60079-31:2022 with Certificate No.: IECEx ITS 24.0016X issued on 25th September 2024 under the names WRF Ex, WRFR6 Ex, WRF2 Ex, WRFD Ex, WRFR2 Ex, WRFR4 Ex and WRFO Ex.




ATTACHMENT TO
CERTIFICATE No. MED013226CS/002
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****