MED319324WSENGD- -  -  N- LJ-D40AJ,LJ-D50AJ,LJ-D65AJ -N- S- S- -24/06/2024- Marine Equipment- - SN- S- - N-  - 1,053,804B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED319324WS- N-Feb 28, 20291053804
 
Form
  Marine Equipment(TO)
MED511923WS/002A,MED319324WS/001
Certification N. MED319324WS - (ENG)
Certificate date 24/06/2024
Type Protezione antincendio
Product Dual-purpose type nozzles (spray/jet type): (a) Hand-held branch pipes for fire service use - Combination branch pipes PN 16
Item Nº MED/3.55a

Model or Denomin.
Items
LJ-D40AJ,LJ-D50AJ,LJ-D65AJ
Applicant LJSAFE TECHNOLOGY CO., LTD.
Place of requester Suite 66 Chuangxin Dadao Taizhou (Jiangsu)  % CHINA
Tel. N.,Fax, Email +86 52 86875583, ---, tec@ljsafe.com
Directive (EU) 2023/1667
Standards EN 15182-1:2019, EN 15182-2:2019.
Reference Documents SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Request 2024/06/05
Expire date 28/02/2029
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED319324WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.55a
Description Dual-purpose type nozzles (spray/jet type): (a) Hand-held branch pipes for fire service use - Combination branch pipes PN 16
Type LJ-D40AJ; LJ-D50AJ; LJ-D65AJ
Applicant LJSAFE TECHNOLOGY CO., LTD.
Suite 66 Chuangxin Dadao Taizhou (Jiangsu),CHINA
Testing standards EN 15182-1:2019, EN 15182-2:2019.
Reference standards SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in SHANGHAI on
This Certificate is valid until
June 24, 2024
February 28, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED319324WS
Page 1 of 3

Product Description


The type LJ-D40AJ, LJ-D50AJ & LJ-D65AJ, Dual-purpose Type Nozzles (Spray/Jet Type), are hand-held branchpipes for fire service use, and use smooth bore jet and/or one fixed spray jet angle branchpipes PN 16.
Type
LJ-D40AJ
LJ-D50AJ
LJ-D65AJ
Nominal Diameter
40 mm
50 mm
65 mm
Working Pressure
6 bar
6 bar
6 bar
Nozzle Diameter
12 mm
16 mm
19 mm
12 mm
16 mm
19 mm
12 mm
16 mm
19 mm
Flow Rate at Straight Jet (@6 bar) (L/min)
194 (*)
196 (**)
245 (*)
247 (**)
290 (*)
292 (**)
216 (*)
220 (**)
318 (*)
322 (**)
352 (*)
354 (**)
238 (*)
240 (**)
390 (*)
390 (**)
470 (*)
474 (**)
Effective Throw
(@6 bar) (m)
25 (*)
27 (**)
27 (*)
28 (**)
29 (*)
30 (**)
25.5 (*)
28 (**)
30 (*)
32 (**)
32.5 (*)
33 (**)
26.5 (*)
29 (**)
31.5 (*)
33 (**)
33.5 (*)
35 (**)
Spray Angle
(6 bar)
> 100°
> 100°
> 100°
Mass (Kg)
1.2 (*)
1.2 (**)
1.6 (*)
1.6 (**)
2.1 (*)
2.14(**)
2.1 (*)
2.13(**)
2.1 (*)
2.13(**)
Note:
*: Data from Technical Drawing **: Data from Test Report
Field of Application

Dual-purpose type nozzles (Spray/Jet type) to be used in conjunction with hoses for fire fighting purposes on board ships.

The dual-purpose type nozzle may be equipped with fixed couplings as well, if the operability of the nozzle is not impaired.

Each product is to be supplied with its manual for use and maintenance.









ATTACHMENT TO
CERTIFICATE No. MED319324WS
Page 2 of 3
Reference Documents

Technical Drawing (LJ-D40AJ), approved by RINA with No.: SHFP-27324;

Technical Drawing (LJ-D50AJ), approved by RINA with No.: SHFP-27325;

Technical Drawing (LJ-D65AJ), approved by RINA with No.: SHFP-27326;

Technical Parameters, filed by RINA with No.: SHFP-27330;

Technical Specification, filed by RINA with No.: SHFP-27331;

Instruction and Maintenance Handbook & Marking, filed by RINA with No.: SHFP-27332;

Material List, approved by RINA with No.: SHFP-25698;

Markings, approved by RINA with No.: SHFP-25972.


Tests Carried Out

Test Report (Ref No.: 20240620-1) issued in compliance with EN 15182-1:2019 & EN 15182-2:2019, and filed by RINA with No.: SHFP-27440.

Remark

The product is to be marked according to EN 15182-1:2019 Ch. 8.2 and in addition with the MED Mark of Conformity, Notified Body No. and the year of manufacturing.

Each branchpipe shall be delivered with an instruction and maintenance handbook, according to Ch. 8.1.2 & 8.1.3 of EN 15182-1:2019.


Note

This certificate annuls and replaces the certificate No. MED485823WS/002 dated 03/01/2024 due to the product is optimized as below, i.e.,
- the Flow deflector of the fire gun is improved, due to increase the sickness of the rubber hardness.
- the front end of the fire gun body has been improved to increase the inner wall diameter, So that the water gun wash test will not fail.
- marking the adjustable jet positions (both visual and mechanical means (haptical devices).




ATTACHMENT TO
CERTIFICATE No. MED319324WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****