MED322424CSENGD- -  -  N- MEDITERRANEA -N- S- S- -02/08/2024- Marine Equipment- - SN- S- - N-  - 3,990B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED322424CS- N-Aug 1, 20293990
 
Form
  Marine Equipment(TO)
MED160924GE/004
Certification N. MED322424CS - (ENG)
Certificate date 02/08/2024
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
MEDITERRANEA
Applicant CANEPA & CAMPI SRL
Place of requester VIA GRAMSCI 4-6  %  16010 Manesseno (GE)  % ITALY
Tel. N.,Fax, Email 0107261006, 0107170020, rcampi@canepaecampi.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81 (70) as amended,IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.,IMO MSC.1/Circ.1470,IMO MSC.1/Circ.1628
Request 01/06/2024
Expire date 01/08/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Giovanni Carratino S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED322424CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.4
Description Life jackets
Type MEDITERRANEA
Applicant CANEPA & CAMPI SRL
VIA GRAMSCI 4-6,16010 Manesseno (GE),ITALY
Testing standards IMO Res. MSC.81 (70) as amended,IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.; IMO MSC.1/Circ.1470; IMO MSC.1/Circ.1628
Issued in Genoa on
This Certificate is valid until
August 2, 2024
August 1, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED322424CS
Page 1 of 2
Inherent buoyant lifejacket for adult, model "MEDITERRANEA" with the followings main components approved and tested according to ISO 12402-7 and listed in materials booklet :
Components
Code
Type
Fabric
ZMR07
Nylon Colibri HD/TH - C&CTex1
Poly 300D - 150HD PES
Buoyancy material
ZPR01
C&C Foam 1 - Sheifloat
Tapes
ZTT10
ZTT15
C&C -N40 PP
C&C -N25 PP
Fasteners
ZNX04
SS40
ZNX08
WSR25
Stitches
ZBA01/02/03
C&C 30-3
Whistle
ZNX05
MW2
Retroreflective tape
L0936C
XT1800A/B - FD1404 - Solasflex

Reference documents


Technical data sheet n° REL-C&C-011 MEDITERRANEA, issued by Canepa & Campi and approved with n° CSST 23100;
General layout n° DIS-C&C-MEDITERRANEA-0, issued by Canepa & Campi and approved with n°CSST23097;
MEDITERRANEA label and marking, issued by Canepa & Campi and approved with CSST 23098;
Materials booklet, issued by Canepa & Campi and filed with n° CSST 23099.

Tests carried out

Water performance test n° 2024CS013224/001/RSA issued by RINA according to MSC.200(80) and MSC.1628 and filed with n° CSST 23102;
Test report n° 2024CS013224 issued by RINA Laboratory in compliance with MSC 200(80) and filed with n° CSST 23103;
Adult Reference Test Device - Buoyancy Tracking and Verification, report n° 2024CS013224/RTD/RSA issued and filed with n° CSST 23101 according to MSC 200(80) and MSC.1/Circ.1470.

Application/Limitation of use

The lifejacket is approved for use only by adult of weight more than 43 kg and height more than 155 cm;
It is designed to fit person weighing up to 140 kg and with a chest girth of up to 1.750mm.

The lifejacket shall be equipped with position indicating lights and retro-reflective materials EC Type Approved in compliance with Directive 2014/90/EU as amended.





ATTACHMENT TO
CERTIFICATE No. MED322424CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****