MED511525CS!040ENGB- -  -  N- 325A-0_1_#2000_01 -N- S- S- -08/01/2026- Marine Equipment- - SN- S- - N-  - 2,372,775B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/040- N-Jan 7, 20312372775
 
Form
  Marine Equipment(TO)
MED511525CS/040
Certification N. MED511525CS/040 - (ENG)
Certificate date 08/01/2026
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
325A-0_1_#2000_01
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/9,IMO Res. MSC.5(48)-(IGC Code) 3,IMO MSC/Circ.1120
Expire date 07/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/040

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type 325A-0_1_#2000_01
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/9; IMO Res. MSC.5(48)-(IGC Code) 3; IMO MSC/Circ.1120
Issued in Genoa on
This Certificate is valid until
January 8, 2026
January 7, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/040
Page 1 of 2

Product description

Window with a frame of 1290 x 1090 mm (LxH). The glass type Controflam Door Lite 30 + Planiclear (manufacturer Vetrotech Saint Gobain), with a total thickness of 32 mm, consists, starting from the exposed side, of: a 11 mm glass layer; a 6 mm spacer; a 8 mm Planiclear layer; a 1.52 mm SGP layer and a 6 mm Planiclear layer. The frame, welded to the bulkhead, consists of a "T" section carbon steel profile having dimension 40 x 112 mm, between the profile and the glass are provided two gasket type Kerafix Flexit (manufacturer Rolf Kuhn GmbH) having width of 15 mm and thickness, starting from the exposed side of 5 mm and 3 mm. Inside the "T" section, above the window, is provided a layer of Promatect H having density of 870 kg/m3 and thickness of 10 mm, filled with mineral wool type Morgan Thermal Ceramics FireMaster Marine Plus Blanket having density of 70 kg/m3 and thickness of 40 mm. Above the "T" section is provided a stainless steel glazing bead having width of 40 mm and thickness of 6 mm, this profile is fixed to the "T" section and to the window with stainless steel M6 x 16 mm screws having pitch of 77 mm. All around the window is provided, for a width of 200 mm, a layer of mineral wool type Paroc Marine Fire Slab 100 having thickness of 60 mm and a density of 100 kg/m3.
Field of application
Fire resistant A-0 Class window with fire hazard in the inner side of the application.
Reference documents
Metalsigma Tunesi spa drawing No. 13461 rev. 0 dated 04/05/2018 enclosed on the test report No. DC02/011/F18 dated 30/05/2018.
Tests carried out
Test as per CSI Test Laboratory report No. DC02/011/F18 issued on 30/05/2018 according to IMO 2010 FTP Code Part. 3 Appendix 2 - A.I - Windows.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/040
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****