MED493826WS!001ENGB- -  -  N- JYBW45L -N- S- S- -08/06/2026- Marine Equipment- - SN- S- - N-  - 190,533B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED493826WS/001- N-Jun 8, 2031190533
 
Form
  Marine Equipment(TO)
MED493826WS/001
Certification N. MED493826WS/001 - (ENG)
Certificate date 08/06/2026
Type Mezzi di salvataggio
Product Winches for survival craft and rescue boats: (a) davit-launched lifeboats
Item Nº MED/1.41a

Model or Denomin.
Items
JYBW45L
Applicant JIANGYINSHI BEIHAI LSA CO., LTD.
Place of requester 58# BAIMA ROAD % YUECHENG, JIANGYIN % CHINA
Tel. N.,Fax, Email 008651086593705, 008651086986869, jybeihai@jybeihai.net
Directive (EU) 2025/1533
Standards IMO Res. MSC.81 (70) as amended
Reference Documents Reg. III/4, III/16,III/17 III/23, III/24, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Expire date 08/06/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED493826WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.41a
Description Winches for survival craft and rescue boats: (a) davit-launched lifeboats
Type JYBW45L
Applicant JIANGYINSHI BEIHAI LSA CO., LTD.
58# BAIMA ROAD,YUECHENG, JIANGYIN,CHINA
Testing standards IMO Res. MSC.81 (70) as amended
Reference standards Reg. III/4, III/16,III/17 III/23, III/24, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in SHANGHAI on
This Certificate is valid until
June 9, 2026
June 8, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED493826WS/001
Page 1 of 2

TECHNICAL DATA


Product Description:
- Winch type JYBW45L is suitable to be used in combination with davit for lifeboats.
- Maximum Working Load: 45 kN
- Maximum Hoisting Load: 24 kN
- Minimum Working Load: 9 kN
- Winch shall be positioned on board in order that if H is the height (m) from the davit head to the waterline (ship at lightest sea-going condition), the lowering speed (with MWL) to the water shall be not less than (0.4+0.02H), or1.0,whichever is less.
- Winch JYBW45L is equipped with electric motor.
- Winch shall be installed with davit that are in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawing SHST-9566 and relevant test report.
-Winch is in compliance with IMO LSA code, as amended by Resolution MSC.554(108).


REFERENCE DOCUMENTS

Dwg. no. Title

SHST-9566 45KN ELECTRICAL BOAT WINCH

TESTS CARRIED OUT
Tests have been carried out on 10/November/2014.




ATTACHMENT TO
CERTIFICATE No. MED493826WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****