MED519323WSENGD- -  -  N- CXH1-10P,CXH2-10P,CXH3-10P,CXH4-10P,CXH6-10P,CXH1-1P,CXH2-1P,CXH3-1P,CXH4-1P,CXH6-1P,CXH1-10SL,CXH2-10SL,CXH3-10SL,CXH4-10SL,CXH6-10SL -N- S- S- -28/03/2025- Marine Equipment- - SN- S- - N-  - 1,221,252B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED519323WS- N-Mar 27, 20301221252
 
Form
  Marine Equipment(TO)
MED647824WS/002
Certification N. MED519323WS - (ENG)
Certificate date 28/03/2025
Type Apparecchiature COLREG72
Product Navigation lights
Item Nº MED/6.1

Model or Denomin.
Items
CXH1-10P,CXH2-10P,CXH3-10P,CXH4-10P,CXH6-10P,CXH1-1P,CXH2-1P,CXH3-1P,CXH4-1P,CXH6-1P,CXH1-10SL,CXH2-10SL,CXH3-10SL,CXH4-10SL,CXH6-10SL
Applicant SHANGHAI LIANGZHOU LAMP MANUFACTURE CO., LTD.
Place of requester NO.69, FENGWANG ROAD, FENGCHENG TOWN, FENGXIAN ZONE Shanghai (Shanghai)  % CHINA
Tel. N.,Fax, Email 021-57512908, 021-57510690, fanggong@liangzhoudq.com
Directive (EU) 2024/1975
Standards EN 14744: (2005) incl. AC (2006) and IEC 60945 (2002) and IEC 60945 Corr.1 (2008)
Reference Documents COLREG 72 Annex I/14, IMO Res. A.694 (17), IMO Res. MSC.253 (83)
Request 11/27/2023
Expire date 27/03/2030
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED519323WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Equipment under COLREG72 requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/6.1
Description Navigation lights
Type CXH1-10P,CXH2-10P,CXH3-10P,CXH4-10P,CXH6-10P,CXH1-1P,CXH2-1P,CXH3-1P,CXH4-1P,CXH6-1P,CXH1-10SL,CXH2-10SL,CXH3-10SL,CXH4-10SL,CXH6-10SL
Applicant SHANGHAI LIANGZHOU LAMP MANUFACTURE CO., LTD.
NO.69, FENGWANG ROAD, FENGCHENG TOWN, FENGXIAN ZONE Shanghai (Shanghai),CHINA
Testing standards EN 14744: (2005) incl. AC (2006) and IEC 60945 (2002) and IEC 60945 Corr.1 (2008)
Reference standards COLREG 72 Annex I/14, IMO Res. A.694 (17), IMO Res. MSC.253 (83)
Issued in SHANGHAI on
This Certificate is valid until
March 28, 2025
March 27, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Zhi Yuan Tan
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED519323WS
Page 1 of 4

Product Description


CXH Series Navigation lights for sailing vessels

Ambient Temperature: -25°C to +55°C

Light Type
Type
Visibility
(nm)
Type of source
Duplex or
Single Type
H.Arc
Rated
Voltage
Power
(W)
Light Color
Degree of protection
Starboard Light  
CXH1-1P
3
Incandescent
bulb
Single
112.5°
AC220V


65
Green
IP56
CXH1-10P
Duplex
Port Light  
CXH2-1P
3
Single
112.5°
Red
CXH2-10P
Duplex
  Masthead Light
CXH3-1P
6
Single
225°
White
CXH3-10P
Duplex
Stern Light
CXH4-1P
3
Single
135°
White
CXH4-10P
Duplex
Towing light
CXH4-1P
3
Single
Yellow
CXH4-10P
Duplex
All-round light 
CXH6-1P
3
Single
360°
White
Yellow
Green
Red
CXH6-10P
Duplex
White
Yellow
Green
Red


ATTACHMENT TO
CERTIFICATE No. MED519323WS
Page 2 of 4

Light Type
Type
Visibility
(nm)
Type of source
Duplex or
Single Type
H.Arc
Rated
Voltage
Power
(W)
Light Color
Degree of protection
 Starboard Light 
CXH1-10SL
3
LED
Duplex
112.5°
AC100V~
AC240V


2×6
Green
IP66
Port Light
CXH2-10SL
3
Duplex
112.5°
2×6
Red
Masthead Light 
CXH3-10SL
6
Duplex
225°
2×12
White
Stern light 
CXH4-10SL
3
Duplex
135°
2×6
White
Towing
Duplex
Yellow
All-round light 
CXH6-10SL
3
Duplex
360°
2×9
White
Yellow
Green
Red

Application/Limitation

Each product is to be supplied with its manual for installation, maintenance, and use.

The navigation lights to be installed in accordance with COLREG 72 as amended and maker’s instructions.

Navigation lamp LED light sources shall not be removed and replaced but replaced integrally if needed.


Design Assessment

The design assessment is based on COLREG 72 Annex I/14, IMO Res. MSC 253(83) and IMO Res. A.694(17).

Navigation lights testing standards shall be carried out according to EN 14744:2005 incl. AC:2006 and IEC 60945:2002 incl. IEC 60945 Corr.1:2008.


Tests Carried Out

Test Report: “Shanghai Institute of Quality Inspection and Technical Research(SQI)” Report No.WM2494240213E, WM2494240119E,WM2494240204E, WM2494240121E, WM2494240205E,WM2494240123E,WM2494240206E,WM2494240207E,WM2494240126E,WM2494240127E,WM2494240209E,WM2494240211E,WM2494240208E,WM2494240210E,WM2494240134E,WM2494240135E,WM2494240133E,WM2012150031E,WM2012250024E-Z,WM2204130014E,WM2204130015E,WM2204130012E,WM2494240228E,WM2204130013E,WM2594240001-1E,WM2594240001E,WM2204130016E~WM2204130021E,WM2012150022E-Y, field by RINA with drawing No. SHEL-23207 ~ SHEL-23239.

Inspection Report (Date on 2024, November 14) edit by “Shanghai Liangzhou Lamp Manufacture Co., Ltd ” and witnessed by RINA Surveyor, and filed by RINA with drawing SHEL-23256.







ATTACHMENT TO
CERTIFICATE No. MED519323WS
Page 3 of 4



Reference Documents

Technical Drawings and Manuals filed by RINA listed on Approval letter No.: SHEL/2025/254/DWA01 and SHEL/2025/256/DWA01.


Marking of Product

Each navigation light shall be marked permanently in a position clearly visible as per IMO Res. A.694(17), IMO Res. MSC.253(83),EN 14744:2005 incl. AC:2006 and IEC 60945:2002 incl. IEC 60945 Corr. 1:2008.





ATTACHMENT TO
CERTIFICATE No. MED519323WS
Pages 4 of 4
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Zhi Yuan Tan
**** NOTICE: This is NOT an official certificate ****