MED153222CS!003ENGD- -  -  N- PROSINTEX -N- S- S- -28/04/2022- Marine Equipment- - SN- S- - N-  - 537,075B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED153222CS/003- N-Apr 27, 2027537075
 
Form
  Marine Equipment(TO)
MED063424MI/007
Certification N. MED153222CS/003 - (ENG)
Certificate date 28/04/2022
Type Protezione antincendio
Product Concentrate for fixed high expansion foam fire extinguishing systems for machinery spaces and cargo pump rooms
Item Nº MED/3.47

Model or Denomin.
Items
PROSINTEX
Applicant PROFOAM SRL
Place of requester VIA MARCONI, 21  %  28060 San Pietro Mosezzo (NO)  % ITALY
Tel. N.,Fax, Email 0321 485511, 0321 485522, ---
Directive (EU) 2021/1158
Standards IMO MSC/Circ.670
Reference Documents IMO Res.MSC.4(48) (IBC Code) Ch.11,IMO MSC/Circ.553
Request 12/04/2022
Expire date 27/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Paolo Brocca S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED153222CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.47
Description Concentrate for fixed high expansion foam fire extinguishing systems for machinery spaces and cargo pump rooms
Type PROSINTEX
Applicant PROFOAM SRL
VIA MARCONI, 21,28060 San Pietro Mosezzo (NO),ITALY
Testing standards IMO MSC/Circ.670
Reference standards IMO Res.MSC.4(48) (IBC Code) Ch.11; IMO MSC/Circ.553
Issued in Genoa on
This Certificate is valid until
April 28, 2022
April 27, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED153222CS/003
Page 1 of 2
Technical Characteristics

Foam Concentrate PROSINTEX
Type of foam concentrate
High expansion synthetic foam concentrate
Mixing Ratio
3% - 4%

Density at 20°C
1.047 g/ml

Viscosity at 20°C
8,0 cST

pH at 20°C
6,5

Lowest temperature for use
- 12 °C

Expansion Ratio at 20 °C
Mixing Ratio 3% : 805
Mixing Ratio 4% : 950
Field of Application

Fixed foam fire extinguishing systems using high expansion foam concentrate for extinguishing fires in machinery space and cargo pump room according to IMO MSC/Circ.670.

Test Carried Out

Technical Report file issued on 06/04/2012 - File No. 2012-CS-01-823 witnessed by RINA and issued According to IMO MSC/Circ.670 - "Guidelines for the performance and testing criteria, and surveys of high-expansion foam concentrates for fixed fire-extinguishing systems" and "Guide for the acceptance of fixed foam-fire extinguishing systems using high expansion foam"published by RINA.


Technical Documentation

  • Test Report No.2012CS01823.




ATTACHMENT TO
CERTIFICATE No. MED153222CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****