MED130621XT!001ENG- -  -  N- BLT-250 -N- S- S- -01/06/2022- Marine Equipment- - SN- S- - N-  - 629,999B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED130621XT/001- N-Jun 1, 2027629999
 
Form
  Marine Equipment(TO)
Certification N. MED130621XT/001 - (ENG)
Certificate date 01/06/2022
Type Mezzi di salvataggio
Product Apparecchi lanciasagole
Item Nº MED/1.11
USCG Category N° 160.040

Model or Denomin.
Items
BLT-250
Applicant DEL-MAR DENIZDE GUVENLIK SIST.TAS.SAN. VE TIC. LTD.STI.
Place of requester TEPEOREN MAHALLESI ITOSB 14.CADDE , NO.8 Tuzla  % TÜRKIYE
Tel. N.,Fax, Email service@delmarsafety.com
+90 216 494 4690
Directive (EU) 2021/1158
Standards IMO Resolution MSC.81(70) as amended, ISO 15736:2006.
Reference Documents Chap. III of SOLAS 74 Convention, as amended,MSC.48(66) LSA Code,RINA Rules for the certification of Marine Equipment
Expire date 01/06/2027
Head Office ISTANBUL
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Onur Cenk Yalcin S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED130621XT/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/1.11
USCG Category Nº 160.040
Description Line-throwing appliances
Type BLT-250
Applicant DEL-MAR DENIZDE GUVENLIK SIST.TAS.SAN. VE TIC. LTD.STI.
TEPEOREN MAHALLESI ITOSB 14.CADDE , NO.8 Tuzla,TÜRKIYE
Testing standards IMO Resolution MSC.81(70) as amended, ISO 15736:2006.
Reference standards Chap. III of SOLAS 74 Convention, as amended; MSC.48(66) LSA Code; RINA Rules for the certification of Marine Equipment
Issued in ISTANBUL on
This Certificate is valid until
June 1, 2022
June 1, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED130621XT/001
Page 1 of 2
Product Description:
BLT 250 is a pneumatic line throwing appliance with minimum shooting range of 230m. Firing unit comprises of built-in cylinder for compressed air, closing valve, trigger mechanism with safety assembly, shooting chamber, regulator / exhaust mechanism and launcher. Projectiles are made of poly-vinyl chloride (PVC) and are filled with poly-ester line with minimum breaking load of minimum 2kN.
Technical Documentation:
Technical Drawings reviewed by RINA with nr. ISMC1362, ISMC1363, ISMC1364, ISMC1365, ISMC1366, ISMC1367, ISMC1368, ISMC1369, ISMC1370, ISMC1371, ISMC1372, ISMC1373, ISMC1374, ISFP3022
Test Report No. RP07-07 (Dated 27.04.2022)
Marking of Product:
Clear and concise directions of use, in English language, supported by illustrations, shall be printed indelibly on the signal body.
The signal body shall bear the following marks:
- Trade name
- SOLAS approved
- Lot number
- Manufacture date
- Date of expiry
- Markings as per MED 2014/90/EU as per page 3.
Application / Limitation:
- As per requirements of regulations stated on front page of this certificate.
- Each line-throwing appliance will be supplied with its instructions for use, inspections and on-board maintenance complying with Regulations stated on the front page of this certificate.
- Each equipment or batch of equipment is to be supplied with its manual(s) for installation, use and maintenance.




ATTACHMENT TO
CERTIFICATE No. MED130621XT/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
**** NOTICE: This is NOT an official certificate ****