MED287425CSENGB- -  -  N- B15GL2AAS -N- S- S- -01/08/2025- Marine Equipment- - SN- S- - N-  - 1,047,638B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED287425CS- N-Jul 31, 20301047638
 
Form
  Marine Equipment(TO)
MED287425CS
Certification N. MED287425CS - (ENG)
Certificate date 01/08/2025
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
B15GL2AAS
Applicant S.I.N. SERVICE SRL
Place of requester VIA DEL PESCATORE 3  %  80053 Castellammare Di Stabia (NA)  % ITALY
Tel. N.,Fax, Email 081 8018602, 081 8727940, tesposito@sinservicesrl.com
Directive (EU) 2024/1975
Standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Request 28/05/2024
Expire date 31/07/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED287425CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type B15GL2AAS
Applicant S.I.N. SERVICE SRL
VIA DEL PESCATORE 3,80053 Castellammare Di Stabia (NA),ITALY
Testing standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Issued in Genoa on
This Certificate is valid until
August 1, 2025
July 31, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED287425CS
Page 1 of 2

Product description

Double-leaf hinged glass door with clear passage dimensions of 1800x2200 mm (WxH) and door leaf dimensions of 1245x2220 mm and 645x2220 mm (WxH). PYROBELITE 12 glass is composed, starting from the side opposite the hinges (the side exposed to fire), of three 3 mm thick tempered float glass panes and two 1.5 mm thick intumescent interlayers, for a total thickness of 12 mm. The lower part of the glass door frame consists of FOSTER code 735.850 carbon steel profiles with a thickness of 65x50 mm; the vertical uprights and upper part feature a FOSTER code 735.800 profile measuring 65x70 mm. The doors are equipped with FOSTER code 901.227 glass stops, screwed in place using FOSTER code 906.577 self-drilling carbon steel bolts. The glass is held in place by a 15x4 mm FOSTER code 948.004 glass gasket. There are two FOSTER seals (code 905.307) between the door and the frame, and each FOSTER profile has a FOSTER intumescent seal (code 948.000). The door frame consists of a FOSTER profile, code 735.800, measuring 65x70 mm, equipped on each vertical upright with 5 carbon steel plates measuring 24x100 mm and 2 mm thick, spaced at intervals varying between 340 mm and 457 mm. in the upper part there are 4 carbon steel plates measuring 24x100 mm and 2 mm thick, spaced at 580 mm intervals and fixed with 4.2x70 mm carbon steel screws to 25x53x25 mm carbon steel C-profiles and 1.5 mm thick positioned on the cut of the class B-15 bulkhead (MED1850112 of 12/06/2018). The doors are equipped with 3 hinges each and, on the main door, a central handle on both sides. The secondary door is equipped with two manual carbon steel Stambecco type 380 latches.
Field of application
Fire resistant B-15 Class single leaf hinged door. The door is also in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested;
- door used with a fire tested frame design.
Reference documents
S.I.N. Service drawing No. "B15GL2AAS" Rev. 04 dated 04/06/2025 enclosed on Test Report N.2025CS012874 dated 01/08/2025 .
Tests carried out
Tests as per RINA Test Laboratory Report No. 2025CS012874 dated 01/08/2025 issued according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED287425CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****