Product Description
- The pilot ladder is assembled with side rope on each side continuous from the top of the ladder to the
bottom (spun thermoset polyester rope with a polypropylene core meeting ISO 1181:2004).
- Each step is supported by each side rope.
- Steps:
The four lowest steps are made of rubber material. LXBXH (525x115x27, at thinnest point) mm.
The remaining steps except spreader steps are made of composite material. LXBXH (528x117x26.9, at
thinnest point) mm.
The spreader steps are made of composite material. LXBXH (1805x116x26.9, at thinnest point) mm.
- Each side rope has a breaking strength of at least 24 kN.
- Length of ladder: 3~25m.
Reference Documents
Appr. Dwg. Title
SHFP-32463 Drawing of Pilot Ladders (Type PCM)
SHFP-35104 Technical Drawing of Rubber Step SHFP-33481 Markings of Pilot Ladders (Type PCM)
Tests Carried Out
- Pilot ladder has been tested in compliance with ISO 799-1:2019, and test reports are filed by RINA with
No.: SHFP-34713, SHFP-35070, SHFP-35424, SHFP-35425 and SHFP-35426.
Remarks
- Each ladder is to be marked in compliance with ISO 799-1: 2019, Clause 8.
- Each replacement step is to be marked in compliance with ISO 799-1: 2019, Clause 8.