Product description
Pressure-vacuum relief valve with integrated deflagration flame arresters in two sizes:
• 3''X4'' and 4''X6''
Design according to:
1) ISO15364:2021 - Ships and marine technology - Pressure-vacuum valves for cargo tanks and devices to prevent the passage of flame into cargo tanks
2) IMO MSC/Circ. 677 (as amended by MSC.1/Circ. 1009 and MSC.1/Circ. 1324) - Revised standards for design, testing and locating of devices to prevent the passage of flame into cargo tanks
3) ISO/IEC 80079-49 - Flame arresters, Performance requirements, test methods and limits for use
Material of construction:
Valve size | 3''x4'' | 4''x6'' |
Body | Carbon steel, Stainless steel | Carbon steel, Stainless steel |
Pallet | Stainless steel | Stainless steel |
Gasket/Sealing | Nitrile,FKM,FEP,PTFE | Nitrile,FKM,FEP,PTFE |
Application/Limitation
The pressure-vacuum valves covered by this certificate may be fitted on tanks containing products with
Maximum Experimental Safety Gap (MESG):
- Equal to or greater than 0.90 (Apparatus Group IIA) (Sizes: 3''X4'' and 4''X6'')
|
ATTACHMENT TO
CERTIFICATE No. MED514725WS
Page 2 of 3 |
Model No. | Size | Set Pressure | Max.working temperature(°C) | Max. Ice thickness(mm) | Max. allowable leak rate(m3/h) |
Pressure side(KPa) | Vacuum side(KPa) |
5910C-S | 3''X4'' | 6~100 | 0.2~6.9 | 60 | 2 | 0.014 |
5910C-S | 4''X6'' | 6~100 | 0.2~6.9 | 60 | 2 | 0.014 |
Installation and maintenance are to be in accordance with the manufacturer's certificate of conformity.
Products covered by this certificate shall be installed on vessels which outlet openings of gas-freeing systems on tanks are fitted with inert gas systems.
Products covered by this certificate shall be installed in sheltered spaces, in addition, an approved flame arrester(not covered by this certificate) should be installed end-of-line which is vented to atmosphere.
The endurance burn test is not carried out considering that flame arresters fitted at vacuum inlets through which vapours cannot be vented.
Materials chosen for the specific system shall be suitable for the intended medium and environmental conditions.
Maximum loading rate, sizing and location shall be in accordance with the latest revision of IMO MSC/Circ. 731.
A copy of the instruction manual shall be kept on board which shall include:
- installation instructions;
- operating instructions;
- maintenance requirements
Type Examination documentation
SSEI test report No. WHXF2025-498-0002-(01~06); WHXF2025-498-0003-(01~06);
Chengdu factory test report No. FJ-M-4052374-002; FJ-M-4052374-003; FJ-M-4052374-004;
Tests carried out
Corrosion, Hydraulic pressure, external ice, leakage tests, against flame transmission, flow measurement
Marking of product
As a minimum, the final product to be marked with at least the following particulars:
• Manufacturer's name or trademark.
• Type designation
• Additional marking acc. IMO MSC/Circ. 677 sec. 4.1 and ISO15364:2021 [12]
• Mark of conformity according to Article 10 of the Council Directive 2014/90/EU