MED131322CSENGF- -  -  N- NEW HYPO ALLERGENIC -N- S- S- -01/04/2022- Marine Equipment- - SN- S- - N-  - 969,565B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED131322CS- N-Mar 31, 2027969565
 
Form
  Marine Equipment(TO)
MED000622GE/106,MED000323GE/141,MED000323GE/198,MED000124GE/002,MED000124GE/074,
MED000124GE/084,MED000124GE/112,MED000124GE/111,MED000124GE/130,MED000124GE/162,
MED000124GE/124,MED000124GE/146,MED000124GE/148,MED000124GE/157,MED000124GE/216,
MED000124GE/187,MED000124GE/188,MED000124GE/189
Certification N. MED131322CS - (ENG)
Certificate date 01/04/2022
Type Protezione antincendio
Product Componenti per letti
Item Nº MED/3.21
USCG Category N° 164.142

Model or Denomin.
Items
NEW HYPO ALLERGENIC
Applicant MATERMOLL S.R.L.
Place of requester VIA VECCHIA FILANDA 28  %  16010 Savignone (GE)  % ITALY
Tel. N.,Fax, Email 010 9642611, 0109642631, pierangela@matermoll.com
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 30/03/2022
Expire date 31/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED131322CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.21
USCG Category Nº 164.142
Description Bedding components
Type NEW HYPO ALLERGENIC
Applicant MATERMOLL S.R.L.
VIA VECCHIA FILANDA 28,16010 Savignone (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 1, 2022
March 31, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED131322CS
Page 1 of 2

Product description

Pillow composed of the following layers:
1st layer: fabric art. TELA 5414, composed of 100% polyester (mass per area 104 g/m2 ± 5%) produced by TISSERAY & Cie.
2 nd layer: stuffing art. FIBRA HOLLOW composed of 100% polyester produced by SASA DIS TICARET A.S..

Thickness range (mm): 100 ÷ 200


Field of application

As bedding components.

Tests carried out

Tests as per RINA Test Laboratory report No. 2022CS01819 dated 21 March 2022 according to IMO 2010 FTP Code Part 9.




ATTACHMENT TO
CERTIFICATE No. MED131322CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****