MED493025CS!003ENGB- -  -  N- PLURATECT MARINE LIGHT B15 -N- S- S- -25/11/2025- Marine Equipment- - SN- S- - N-  - 704,840B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED493025CS/003- N-Nov 24, 2030704840
 
Form
  Marine Equipment(TO)
MED493025CS/003
Certification N. MED493025CS/003 - (ENG)
Certificate date 25/11/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model
Items/Sizes
PLURATECT MARINE LIGHT B15
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
Place of requester BORMSTRAAT 24  %  2830 Tisselt  % BELGIUM
Tel. N.,Fax, Email +32 15 71 82 70, ---, invoices.be@etexgroup.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120,IMO MSC.1/Circ. 1581
Request 27/10/2025
Validity 24/11/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED493025CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type PLURATECT MARINE LIGHT B15
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
BORMSTRAAT 24,2830 Tisselt,BELGIUM
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO MSC/Circ. 1120; IMO MSC.1/Circ. 1581
Issued in Genoa on
This Certificate is valid until
November 25, 2025
November 24, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED493025CS/003
Page 1 of 2

Product description



Bulkhead conposed of panels having maximum height of 2525 mm and maximum width of 1200 mm. Each panel is composed of one slab of product named PLURATECT Marine Light, 19 mm thick and having density of 500 kg/m3. The panels are joined by means of a carbon steel flat 32 mm wide and 1.5 mm thick fitted, in the middle of the panel thickness, in a suitable slot and fixed with non-combustible adhesive type PROMACOL MARINE. The bulkhead is fitted, on the perimeter, with ā€œCā€ shaped steel profiles having thickness of 1.5 mm.

Field of application

Fire resistant B-15 Class bulkhead for general applications.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.


Reference documents

Promat drawing No. R 20 DAM 20 rev 2 dated 6 November 2020 approved on 26 November 2020 with endorsement No. LABS-2109.


Tests carried out

Tests as per RINA Test Laboratory reports No. 2020CS011678 issued on 26 November 2020 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED493025CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****