MED244422CSENGD- -  -  N- MD9822 and MD9832 manual call points -N- S- S- -19/06/2024- Marine Equipment- - SN- S- - N-  - 840,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED244422CS- N-Jun 19, 2029840487
 
Form
  Marine Equipment(TO)
MED068924SP/001,MED101124SP
Certification N. MED244422CS - (ENG)
Certificate date 19/06/2024
Description
Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces,(f) Manual call points,(g) Short circuit isolators
Type Protezione antincendio
Product Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (f) Manual call points
Item Nº MED/3.51f,MED/3.51g

Model
Items/Sizes
MD9822 and MD9832 manual call points
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA GRETI DEL VARA 9  %  19020 Follo (SP)  % ITALY
Tel. N.,Fax, Email 0187 599101, 0187 558983, d.dido@microdatasrl.it
Directive (EU) 2023/1667
Standard EN 54-11: (2001) incl. A1 (2005),EN54-17:2005 incl. AC:2007  IEC 60092-504: 2016,IEC 60533: 2015 IACS UR E10 Type Tests
Reference Documents SOLAS 74 Reg. II-2/7,SOLAS 74 Reg. X/3,IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC code) 7,IMO Res. MSC.98(73)-(FSS Code) 9,IMO Res. MSC391(95)-(IGF Code) 11,IMO MSC.1/Circ 1242,RINA Rules for the certification of Marine Equipment
Validity 19/06/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Valerio Bonanni S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED244422CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.51f,MED/3.51g
Description Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces,(f) Manual call points,(g) Short circuit isolators
Type MD9822 and MD9832 manual call points
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
VIA GRETI DEL VARA 9,19020 Follo (SP),ITALY
Testing standards EN 54-11: (2001) incl. A1 (2005),EN54-17:2005 incl. AC:2007  IEC 60092-504: 2016,IEC 60533: 2015 IACS UR E10 Type Tests
Reference standards SOLAS 74 Reg. II-2/7; SOLAS 74 Reg. X/3; IMO Res. MSC.36(63)-(1994 HSC Code) 7; IMO Res. MSC.97(73)-(2000 HSC code) 7; IMO Res. MSC.98(73)-(FSS Code) 9; IMO Res. MSC391(95)-(IGF Code) 11; IMO MSC.1/Circ 1242; RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
June 19, 2024
June 19, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED244422CS
Page 1 of 4





MD 9822 - IP22 manual call point
MD 9832 - IP66 manual call point

Microdata Due reference documents:
Technical specification n. ST42258 ver. 0 - RINA id. n. ELET-35206
Data sheets n. D42285 Rev. A, D42286 Rev. A - RINA id. n. ELET-35207, ELET-35208
Risk assessment n. D42261 Rev. 0 - RINA id. n. ELET-35209
Software description n. SDD42312 Rev. 0 - RINA id. n. ELET-35210

Test reports:
CNBOP-PIB 247/BA/22 (MD 9822 & MD 9832 - EN 54-11, EN 54-17) (03/04/2023) - RINA id. n. ELET-35257
Microdata Due istruction n. IS42307 Rev. 0 - RINA id. n. ELET-35211
TesLab 227219F-a (MD 9832 - IEC 60092-504) (30/03/2023) - RINA id. n. ELET-35258
TesLab 227219F-b (MD 9822 - IEC 60092-504) (07/03/2023) - RINA id. n. ELET-35259
TesLab 225152A (MD 9822 - EN 60529) (14/06/2022) - RINA id. n. ELET-35260
TesLab 225153A (MD 9832 - EN 60529) (14/06/2022) - RINA id. n. ELET-35261




ATTACHMENT TO
CERTIFICATE No. MED244422CS
Pages 4 of 4
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****