MED261126WSENGB- -  -  S- FH65 -S- S- S- -16/04/2026- Marine Equipment- - SN- S- - N-  - 120,455B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED261126WS- N-Apr 15, 2031120455
 
Form
  Marine Equipment(TO)
MED261126WS
Certification N. MED261126WS - (ENG)
Certificate date 16/04/2026
Type Mezzi di salvataggio
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº MED/1.23

Model or Denomin.
Items
FH65
Manufacturer ZHEJIANG WANTONG HEAVY INDUSTRY CO., LTD.  
Cross reference:  ZHEJIANG WANTONG HEAVY INDUSTRY CO., LTD.
Tel. N.,Fax, Email 0086 576 82728810, 0086 576 82728811, 190969738@QQ.COM
Place of production NO.680 HAI CHANG ROAD,BIN HAI INDUSTRIAL PARK,  %  318000 Taizhou, Zhejiang  % CHINA
Tel. N.,Fax, Email 0086 576 82728810, 0086 576 82728811, 190969738@QQ.COM
Applicant ZHEJIANG WANTONG HEAVY INDUSTRY CO., LTD.
Place of requester NO.680 HAI CHANG ROAD,BIN HAI INDUSTRIAL PARK,  %  318000 Taizhou, Zhejiang  % CHINA
Tel. N.,Fax, Email 0086 576 82728810, 0086 576 82728811, 190969738@QQ.COM
Directive (EU) 2025/1533
Standards IMO Res. MSC.81 (70), as amended
Reference Documents Reg. III/4, III/16, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Expire date 15/04/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED261126WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.23
Description Launching appliances for free-fall lifeboats
Type FH65
Applicant ZHEJIANG WANTONG HEAVY INDUSTRY CO., LTD.
NO.680 HAI CHANG ROAD,BIN HAI INDUSTRIAL PARK,,318000 Taizhou, Zhejiang,CHINA

Testing standards IMO Res. MSC.81 (70), as amended
Reference standards Reg. III/4, III/16, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in SHANGHAI on
This Certificate is valid until
April 16, 2026
April 15, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED261126WS
Page 1 of 2
Manufacturer
ZHEJIANG WANTONG HEAVY INDUSTRY CO., LTD.
Place of Manufacturer
NO.680 HAI CHANG ROAD,BIN HAI INDUSTRIAL PARK,,318000 Taizhou, Zhejiang,CHINA
TECHNICAL DATA

Length of ramp: 7800 mm
Breadth (inner): 2770 mm
Maximum Working Load: 65 kN
Maximum Recovering Load: 42 kN

Minimum Working Load: 36 kN
Angle of ramp: 35 deg

Secondary means of launching:

Hydraulic winch type IYJ4-50-120-20-ZP
System rated pressure: 200 bar
Steel wire with diameter of 20 mm


Trim and list of up to respectively 10 and 20 degrees for the launching appliance
Trim and list of up to respectively 2 and 5 degrees for the secondary launching appliance
Davit shall be installed in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).

REFERENCE DOCUMENTS
Drawing approved with No. SHST-7024

TESTS CARRIED OUT

Test has been carried out on 29/March/2021.





ATTACHMENT TO
CERTIFICATE No. MED261126WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****