MED218225PUENGB- -  -  N-  HLB70T / HLB70F -N- S- S- -24/11/2025- Marine Equipment- - NN- S- - N-  - 1,216,922B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED218225PU- N-Nov 24, 20301216922
 
Form
  Marine Equipment(TO)
MED218225PU
Certification N. MED218225PU - (ENG)
Certificate date 24/11/2025
Type Mezzi di salvataggio
Product Davit-launched lifeboats used as a rescue boat: (c) partially enclosed/totally enclosed
Item Nº MED/1.17c

Model or Denomin.
Items
HLB70T / HLB70F
Applicant HLBENG CO., LTD.
Place of requester 216-53 Dangwol-ro, Onsan-eup, Ulju-gun,  %  45011 Ulsan  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 52 256 9442, ---, toying21@hlb-eng.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102), IMO MSC/Circ.1006.
Reference Documents SOLAS 74 Reg. III/21, SOLAS 74 Reg. III/31, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.48(66)-(LSA Code) V, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630 Rev.2, IMO MSC.1/Circ.1631.
Expire date 24/11/2030
Head Office BUSAN
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jin Young Kim S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED218225PU

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.17c
Description Davit-launched lifeboats used as a rescue boat: (c) partially enclosed/totally enclosed
Type HLB70T / HLB70F
Applicant HLBENG CO., LTD.
216-53 Dangwol-ro, Onsan-eup, Ulju-gun,,45011 Ulsan,REPUBLIC OF KOREA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102), IMO MSC/Circ.1006.
Reference standards SOLAS 74 Reg. III/21, SOLAS 74 Reg. III/31, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.48(66)-(LSA Code) V, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630 Rev.2, IMO MSC.1/Circ.1631.
Issued in BUSAN on
This Certificate is valid until
November 25, 2025
November 24, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Jin Young Kim
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED218225PU
Page 1 of 3


Product Description

  • HLB70T : Totally enclosed lifeboat used as a rescue boat, Self-righting type
  • HLB70F : Totally enclosed lifeboat used as a rescue boat, Self-righting type, Equipped with self-contained air support and water spray system


Length x Breadth x Depth
7.0 m x 2.7 m x 1.2 m
Hull material (G.R.P) Resin
Polycoat NA-108 (Manufacturer: Aekyung Chemical Co., Ltd.)
Polystar R235SE (Manufacturer: Sewon Chemical Co., Ltd.)
Mat
EMC300, EMC450 (Manufacturer: Jushi Group Co., Ltd.)
CM300, CM450 (Manufacturer: Owens Corning Korea)
Roving
EWR800 (Manufacturer: Jushi Group Co., Ltd.)
CM860 (Manufacturer: Owens Corning Korea)
Type of release mechanism(s)
TALON II 4.0 (4 ton x 2 ea)
(Manufacturer: HLBENG Co., Ltd.)
Propulsion type
Inboard marine diesel engine
Minimum speed
≥6 Knots
Type of boat
HLB70T
HLB70F
Light load (fully equipped)
2,250 kg
2,450 kg
Recovery weight (6 person, 82.5kg)
2,745 kg
2,945 kg
Full load (50 persons, 82.5kg)
6,375 kg
6,575 kg
Bollard pull force
2,499 N (Max) / Engine model: HB29D1
(Manufacturer: HLBENG Co., Ltd.)





ATTACHMENT TO
CERTIFICATE No. MED218225PU
Page 2 of 3
Technical Documentation
  • Technical drawings and Manual, filed by RINA listed on Letter No. PUFP/2025/446/YK008
Tests Carried Out
  • Test Report of Measuring Position and Results of Accelerations for Side Impact Test of the Life Boat for 50 Persons (Ref. No. RIMS.GW-2020-009), issued by Research Institute of Medium & Small Shipbuilding dated on 08-10-2020, filed by RINA with No. PUFP-7946;
  • Test report of Fire-retardant & Flame-resistant test materials (Ref. No. 2018-04-M004 ~ M006), issued by Shanghai R&D Center for Polymer material dated on 20-04-2018 and 27-04-2018, filed by RINA with No. PUFP-7947;
  • Type Examination Test Report, witnessed by KR Hellas Ltd. dated on 24-09-2020, filed by RINA with No. PUFP-7948.
Application/Limitation

  • Life/Rescue boat equipment and marking/instructions are to be inspected after installation onboard the ship.
  • Production and installation testing shall be carried out according to IMO Res.MSC.81(70), part 2 as amended.
  • Instructions for installation, use and maintenance are to be available in the ship’s official language.
  • Listed in Marine Equipment Directive such as Engine, Release mechanism and all the equipment supplied with this boat shall be certified according to the provisions of current revision of Marine Equipment Directive.
  • Product shall be permanently marked with as follows in accordance with the LSA Code, item 4.4.1.2.

Notes
  • None.









ATTACHMENT TO
CERTIFICATE No. MED218225PU
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Jin Young Kim
**** NOTICE: This is NOT an official certificate ****