MED251522CS!002ENGF- -  -  N- YSY-A -N- S- S- -01/09/2022- Marine Equipment- - SN- S- - N-  - 1,036,527B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED251522CS/002- N-Aug 31, 20271036527
 
Form
  Marine Equipment(TO)
MED546125WS/002,MED838425WS/002,MED309426WS/002,MED309426WS/007,MED475526WS/003
Certification N. MED251522CS/002 - (ENG)
Certificate date 01/09/2022
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
YSY-A
Applicant NANJING LISHUI YISHENG SHIP FITTING FACTORY
Place of requester No.1,Runyang Road,Yongyang Town, Lishui  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 22/06/2022
Expire date 31/08/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED251522CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type YSY-A
Applicant NANJING LISHUI YISHENG SHIP FITTING FACTORY
No.1,Runyang Road,Yongyang Town, Lishui,CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
September 1, 2022
August 31, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED251522CS/002
Page 1 of 2

Product description

Circular window having maximum clear size of 450 in diameter. The window is composed of a window seat made up of steel plate having dimensions of 10x8 mm and 8x45 mm, a window frame made up of steel plate having dimensions of 16x15 mm and a glass retaining frame made up of steel plate having dimensions of 40x6 mm. The glass pane compound having total thickness of 45 mm (provided by Qinhuangdao City Haigang District Yuehua Industrial Technical Factory), is composed moving from the side exposed to the fire, of a 19 mm thick toughened glass, a gel layer having thickness of 20 mm and a 6 mm thick toughened glass. The glass pane is held in place through glass retaining frame screwed to window frame and seat by means of 20 flat screws M6x20.
Insulation material composed by ceramic wool type TG-II having nominal density of 170 kg/m3 and thickness of 40 mm manufacturer by Suzhou Youlian Ship Fitting Co. Ltd was fixed between glass pane and window frame while between glass and frame and between glass and glass retaining frame, fire strips 20 x 4 mm provided by Shanghai Jaar Fu Decoration Material Company Ltd., are fitted.
Field of application
Fire resistant A-60 Class window with fire hazard in the outer side of the application.
Reference documents
Drawings enclosed to FAR EAST FIRE TESTING CENTRE test report No. FT20465 dated 8 January 2021 (Figure 7 รท Figure 11).
Tests carried out
Tests as per FAR EAST FIRE TESTING CENTRE test report No. FT20465 dated 8 January 2021 issued according to IMO 2010 FTP CODE.




ATTACHMENT TO
CERTIFICATE No. MED251522CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****