MED013924CS!001ENGD- -  -  N- NIDO 6006 - 7018 -N- S- S- -15/02/2024- Marine Equipment- - SN- S- - N-  - 1,076,762B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED013924CS/001- N-Feb 14, 20291076762
 
Form
  Marine Equipment(TO)
MED055724NA/003
Certification N. MED013924CS/001 - (ENG)
Certificate date 15/02/2024
Type Protezione antincendio
Product Materiali non combustibili
Item Nº MED/3.13
USCG Category N° 164.109

Model or Denomin.
Items
NIDO 6006 - 7018
Applicant STARCELL SPA
Place of requester VIA SEBENICO 22  %  20124 Milano (MI)  % ITALY
Tel. N.,Fax, Email 026883537, 0269008152, ---
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 11/01/2024
Expire date 14/02/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED013924CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.13
USCG Category Nº 164.109
Description Non-combustible materials
Type NIDO 6006 - 7018
Applicant STARCELL SPA
VIA SEBENICO 22,20124 Milano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
February 15, 2024
February 14, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED013924CS/001
Page 1 of 2

Product description



Aluminium honeycomb panel.
  • Cell size range (mm) 6 ÷ 18
  • Nominal thickness range (mm) 3 ÷ 50


Field of application

As non combustible material.
Tests carried out

Tests as per RINA SPA Test Laboratory report No. 2009CS01320/2 issued on 17 February 2009 according to IMO Res. A.799(19) (Test method ISO 1182:1990).




ATTACHMENT TO
CERTIFICATE No. MED013924CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****