MED111724WSENGF- -  -  N- FSAR25W -N- S- S- -19/11/2024- Marine Equipment- - SN- S- - N-  - 201,826B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED111724WS- N-Nov 18, 2029201826
 
Form
  Marine Equipment(TO)
MED579724WS/001,MED579724WS/003
Certification N. MED111724WS - (ENG)
Certificate date 19/11/2024
Description
Launching appliances using falls (davits),Liferaft launching appliances (davits)
Type Mezzi di salvataggio
Product Launching appliances using falls (davits),Liferaft launching appliances (davits)
Item Nº MED/1.21,MED/1.24

Model or Denomin.
Items
FSAR25W
Applicant FASSMER-MARLAND INT'L LTD.
Place of requester No.23, Hemin Road, Cuiheng New District  %  528437 Zhongshan (Guangdong)  % CHINA
Tel. N.,Fax, Email ---,+86 18319951964, johnny@fassmer-marland.com
Directive (EU) 2024/1975
Standards IMO Res. MSC 81(70) as amended
Reference Documents SOLAS 74 Reg. III/4, III/12, III/16, III/23, III/33, III/34 and Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.459(101), IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Expire date 18/11/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED111724WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.21,MED/1.24
Description Launching appliances using falls (davits),Liferaft launching appliances (davits)
Type FSAR25W
Applicant FASSMER-MARLAND INT'L LTD.
No.23, Hemin Road, Cuiheng New District,528437 Zhongshan (Guangdong),CHINA
Testing standards IMO Res. MSC 81(70) as amended
Reference standards SOLAS 74 Reg. III/4, III/12, III/16, III/23, III/33, III/34 and Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.459(101), IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Issued in SHANGHAI on
This Certificate is valid until
November 19, 2024
November 18, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED111724WS
Page 1 of 2
TECHNICAL DATA

Product Description:
- Davit for rescue boat and life raft.
- Maximum Working Load: 25 kN
- Minimum Launching Load: 1.5 kN
- Maximum hoisting Load: 20 kN
- Arrangement/positioning of launching appliance on board of ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Trim and list of up to respectively 10 and 20 degrees for the launching appliance.
- Reference is to be made to approved drawing SHST-51864/51407 and relevant test report.

REFERENCE DOCUMENTS

Dwg. no. Title

SHST-51406 Supplementary calculation for davit arm of FSAR25W
SHST-51407 Winch location and jib frame
SHST-51861 Calculation for FSAR25W davit and DZA20 winch
SHST-51863 FSAR25W davit_operation instruction manual
SHST-51864 FSAR25W rescue boat/liferaft avit and DZA20 winch

TESTS CARRIED OUT

Tests have been carried out on 12/October/2024.




ATTACHMENT TO
CERTIFICATE No. MED111724WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****