MED086122CSENGD- -  -  N- REX ADULT -N- S- S- -07/04/2022- Marine Equipment- - SN- S- - N-  - 713,784B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED086122CS- N-Apr 6, 2027713784
 
Form
  Marine Equipment(TO)
MED136924ME/007
Certification N. MED086122CS - (ENG)
Certificate date 07/04/2022
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
REX ADULT
Applicant ATLANTIS S.R.L.
Place of requester ZONA INDUSTRIALE S.N.  %  89056 SANTA CRISTINA D'ASPROMONTE  (RC)  % ITALY
Tel. N.,Fax, Email 0966 878809, 0966 88144, atlantisitalia@pec.it
Directive (EU) 2021/1158
Standards IMO Res.MSC 81(70) as amended
Reference Documents SOLAS 74 Reg. III/7 , SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470.
Request 27/03/2020
Expire date 06/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Giovanni Carratino S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED086122CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/1.4
Description Life jackets
Type REX ADULT
Applicant ATLANTIS S.R.L.
ZONA INDUSTRIALE S.N.,89056 SANTA CRISTINA D'ASPROMONTE (RC),ITALY
Testing standards IMO Res.MSC 81(70) as amended
Reference standards SOLAS 74 Reg. III/7 , SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470.
Issued in Genoa on
This Certificate is valid until
April 7, 2022
April 6, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED086122CS
Page 1 of 2
Main characteristics

Inherent buoyant lifejacket for adult, "REX ADULT" with the followings main components:

Components
Type
Manufacturer
Fabric
Seagull Arancio Fluo
Stefano Mardegan S.r.l
Buoyancy material
Multifom L 100 mm
Isofom S.r.l
Fasteners
SS40/WSR20/HB40
ITW Nexus/Due Emme S.r.l
Whistle
LJW2
Due Emme S.r.l
Tapes
Code 30563/10086/30163/30620
Eurotex Srl
Stitches
Atlase
Coats Ltd
Retroreflective tape
Solasflex 50x90 mm/Class I Scg 800
Marine Grade Solas
T-Iss B.V/Anhui San Cunguang
R.Co., Ltd

Main characteristicsReference documents

REX Adult Technical Specification Doc n°ST-001-20 Rev 04, issued by Atlantis Srl and approved with n° CSST 20099; REX Adult Materials and components Booklet Doc n° ST001/20 issued by Atlantis Srl and filed with n° CSST 20102. Material Datasheet for Reference Test Device ATL- 0110-A and ATL-0110-C issued by Atlantis Srl and filed by RINA with n° CSST 17689.
Tests carried out
Water performance test report n° WPT/2022/01/483 witnessed and filed by RINA with n° CSST20100;
Adult RTD buoyancy tracking and verification, report n° RTD/ATL/01/22, filed by RINA with n° CSST20101;
Laboratory test report n° 2014CS013602, n° 2017CS011525 and n° 2020CS011102/2 issued by RINA Laboratory and filed with CSST 12240, CSST 14882 and n° CSST 18279.

Application/Limitation of use
The lifejacket is approved for use only by adult of weight more than 43 kg and height more than 155 cm;
An extention belt is available in order to fit persons weighing up to 140 kg and with a chest girth of up to 1.750mm.
The lifejacket may be equipped with the following lights:
- Mod. ALX & ALX II by Epsilor Electric Fuel Ltd;
- Mod. LNK-LJ-03A1/LNK-J-03A1W by Xiamen Lonako Industry & Trade Co., Ltd;
- Mod. REVENGE by Sic Divisione Elettronica Srl;
- Mod. M4-A/W4-4 by Daniamant Aps.
The lifejacket can be equipped with different position indicating lights and retro-reflective materials EC type
Approved in compliance with Directive 2014/90/EU as amended.

Remark
This certificate supersides and replaces certificate MED110220CS.




ATTACHMENT TO
CERTIFICATE No. MED086122CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****