MED407423CS!001ENGB- -  -  N- SINGLE HINGED DOOR DM6A_NS -N- S- S- -29/11/2023- Marine Equipment- - SN- S- - N-  - 244,549B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED407423CS/001- N-Aug 28, 2028244549
 
Form
  Marine Equipment(TO)
MED407423CS/001
Certification N. MED407423CS/001 - (ENG)
Certificate date 29/11/2023
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
SINGLE HINGED DOOR DM6A_NS
Applicant NAVAL SUPPLIERS SRL
Place of requester ZONA INDUSTRIALE 24  %  33049 San Pietro Al Natisone (UD)  % ITALY
Tel. N.,Fax, Email 0432 727860, 0432 727886, firedoors@navalsuppliers.com
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 29/11/2023
Validity 28/08/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED407423CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type SINGLE HINGED DOOR DM6A_NS
Applicant NAVAL SUPPLIERS SRL
ZONA INDUSTRIALE 24,33049 San Pietro Al Natisone (UD),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
November 29, 2023
August 28, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED407423CS/001
Page 1 of 2

Product description

Single leaf hinged door whose maximum clear opening size is 1200 mm (W) and 2200 mm (H). The leaf, having maximum dimensions of 1242 mm in width, 2217 mm in height and thickness of 50.4 mm, is composed of two steel sheets, 1.2 mm thick each and, in between, the insulating material. Such material is composed, moving from the side opposite to the hinges, of a layer of mineral wool, 40 mm thick and having density of 145 kg/m3 named SEAROX SL 440 and a layer of an insulating material named PROMATECT H, 8 mm thick and having density of 870 kg/m3. The door is fixed to a bulkhead certified as “A-60 lightweight bulkhead” (certificate N. MED-B-7525 dated 30/1/2012). The door frame, having height of 2613 mm, is composed of an L shaped steel profile, 4 mm thick and having dimensions of 29x61 mm, bolted to a steel profile, 2 mm thick, fixed to the bulkhead.

Field of application
Fire resistant A-30 Class single leaf hinged door.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
OFFICINE DEL BELLO drawing No. PTI_11_PTF_A60_1-DBA rev. 2 dated 31 July 2013 approved on 27 August 2013 with endorsement No. LABS-812.

Tests carried out
Test as per RINA Test Laboratory report No. 2013CS012309 issued on 27 August 2013 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED407423CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****