MED117323XPENGD-  -  NNavilight 360° & Tricolor -NSS-06/11/2023Marine EquipmentSNSN-  - 1,095,378B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailRMED117323XPN-Nov 5, 20281095378
 
Form
  Marine Equipment(TO)
MED374123WS
Certification N. MED117323XP - (ENG)
Certificate date 06/11/2023
Type Apparecchiature COLREG72
Product Navigation lights
Item Nº MED/6.1

Model or Denomin.
Items
Navilight 360° & Tricolor
NAVISAFE NS001 & NS305
Applicant Boatsystem Group Sweden AB
Place of requester Traneredsvägen 112  %  426 56 VÄSTRA FRÖLUNDA  % SWEDEN
Tel. N.,Fax, Email +46 73 980 16 50, ---, ekonomi@boatsystemgroup.com
Directive (EU) 2023/1667
Standards EN 14744: (2005) incl. AC (2006) and IEC 60945 (2002) and IEC 60945 Corr.1 (2008)
Reference Documents COLREG Annex I/14, IMO Res. A.694 (17), IMO Res. MSC.253 (83)
Expire date 05/11/2028
Responsible Office Gdańsk
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Daria Orzech S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED117323XP

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Equipment under COLREG72 requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/6.1
Description Navigation lights
Type Navilight 360° & Tricolor
NAVISAFE NS001 & NS305
Applicant Boatsystem Group Sweden AB
Traneredsvägen 112,426 56 VÄSTRA FRÖLUNDA,SWEDEN
Testing standards EN 14744: (2005) incl. AC (2006) and IEC 60945 (2002) and IEC 60945 Corr.1 (2008)
Reference standards COLREG Annex I/14, IMO Res. A.694 (17), IMO Res. MSC.253 (83)
Issued in Gdańsk on
This Certificate is valid until
November 6, 2023
November 5, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Anna Maria Baranska
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED117323XP
Page 1 of 2
Place of Manufacturer:
Block 66, Xinsha Industrial Center,
Pinghu Town, Longgang District,
Shenzhen, China.

Product description
Navilight 360° is a combines water proof, 360 degree visibility super bright navigation light and intense emergency blink.
It is integrated into a compact shape that fits easily in your pocket. It has a wide range of applications.


Power supply:Batteries: 3 X AAA.

Model
Size
Weight
Corrosion resistant 
Submersible
Light direction
Power
Color of light
Navilight 360° 2NM
H = 35 mm,
D = 68 mm 
109 g 
Yes
Yes up to 20m
Horizontal / 360 Degrees
1
White
Navilight Tricolor 2NM
H = 35 mm,
D = 68 mm 
109 g 
Yes
Yes up to 20m
Horizontal / 360 / 135° White, 112,5° Red, 112,5° Green
1
Red / Green / White

Reference documents:
- User’s manual for Navilight 360° 2NM / Navilight 360° Rescue 2NM filled by RINA with No. PLFP/2677.
- EU Declaration of Conformity issued by Boatsystem Group filled by RINA with No. PLFP/2672.
- Navilight-360 technical data sheet by Navisafe filled by RINA with No. PLFP/2674.
- Risk analysis filled by RINA with No. PLFP/2675.
- Verification of Compliance issued on 23.11.2015 by SGS Laboratory filled by RINA with No. PLFP/2676.

Test reports:
-
Test reports No. 19121-1 issued on 25.07.2011 by IMANNA Laboratory,
- Test reports No. 19491-1 issued on 25.10.2012 by IMANNA Laboratory,
- Test reports No. 21-21742-2A issued on 10.10.2023 by IMANNA Laboratory,
- Test reports No. 21-21808-1 issued on 06.04.2021 by IMANNA Laboratory,
filled by RINA with No. PLFP/2673.




ATTACHMENT TO
CERTIFICATE No. MED117323XP
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Anna Maria Baranska
**** NOTICE: This is NOT an official certificate ****