MED096524CSENGD- -  -  N- ORIONE 300 -N- S- S- -20/03/2024- Marine Equipment- - SN- S- - N-  - 3,990B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED096524CS- N-Mar 19, 20293990
 
Form
  Marine Equipment(TO)
MED160924GE/008
Certification N. MED096524CS - (ENG)
Certificate date 20/03/2024
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
ORIONE 300
Applicant CANEPA & CAMPI SRL
Place of requester VIA GRAMSCI 4-6  %  16010 Manesseno (GE)  % ITALY
Tel. N.,Fax, Email 0107261006, 0107170020, rcampi@canepaecampi.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81 (70) as amended,IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.,IMO MSC.1/Circ.1470,IMO MSC.1/Circ.1628
Request 01/03/2024
Expire date 19/03/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED096524CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.4
Description Life jackets
Type ORIONE 300
Applicant CANEPA & CAMPI SRL
VIA GRAMSCI 4-6,16010 Manesseno (GE),ITALY
Testing standards IMO Res. MSC.81 (70) as amended,IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.; IMO MSC.1/Circ.1470; IMO MSC.1/Circ.1628
Issued in Genoa on
This Certificate is valid until
March 20, 2024
March 19, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED096524CS
Page 1 of 3
Main characteristics

Inflatable lifejacket for adult, mod. ORIONE 300 with the followings main components:

- Materials and components approved and/or tested according to ISO 12402-7:2020;

- Retro-reflective materials approved according to IMO MSC.481(102).

Reference documents

Rel C&C 008.1 Orione 300, Rev 0 issued by Canepa & Campi Srl and approved by RINA with n° CSST 22340;
Lay-out drawing n° DIS-C&C-022-023-026/23 issued by Canepa & Campi Srl and approved by RINA with n° CSST 22341;
Technical booklet of "Reference Test Device " issued by Canepa & Campi Srl and filed by RINA with n° CSST 4464;
ORIONE 300 Label issued by Canepa & Campi Srl and approved by RINA with n° CSST 22342.
Tests carried out

Water performance test dated 1_12_2021 issued by RINA and filed with n° CSST 19939 in compliance with Res. MSC. 81(70) as amended by MSC.200(80).

Laboratory test report n° 2013CS011091 issued by RINA Laboratory on 29/08/2013 and filed with n° CSST 10440;

RTD additional buoancy tracking, issued by RINA and filed with n° CSST 19949.

Application/Limitation of use

The lifejacket is approved for use only by adult of weight more than 43 kg and height more than 155 cm;
It is designed to fit person weighing up to 140 kg and with a chest girth of up to 1.750mm.
Safety harness device with AISI304 double fasteners tested in compliance with ISO12401 may be fixed on lifejacket.

The lifejacket may be equipped with the following light:
- Mod C&C Light 01(approved as per MED/1.2c);

The lifejacket can be equipped with different position indicating lights and retro-reflective materials EC type Approved in compliance with Directive 2014/90/EU as amended.




ATTACHMENT TO
CERTIFICATE No. MED096524CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****