MED272926WS!001ENGB- -  -  N- NPT30DRA -N- S- S- -25/04/2026- Marine Equipment- - SN- S- - N-  - 1,057,144B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED272926WS/001- N-Apr 24, 20311057144
 
Form
  Marine Equipment(TO)
MED272926WS/001
Certification N. MED272926WS/001 - (ENG)
Certificate date 25/04/2026
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
NPT30DRA
Applicant JIANGYIN NEPTUNE MARINE APPLIANCE CO., LTD.
Place of requester 25# Beihuan Road, Yuecheng Town, Jiangyin City, Jiangsu Province, China
Tel. N.,Fax, Email 0510-86985285, 0510-86985288, qa@neptunelifeboat.cn
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Expire date 24/04/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED272926WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type NPT30DRA
Applicant JIANGYIN NEPTUNE MARINE APPLIANCE CO., LTD.
25# Beihuan Road, Yuecheng Town, Jiangyin City, Jiangsu Province, China
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Issued in SHANGHAI on
This Certificate is valid until
April 25, 2026
April 24, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED272926WS/001
Page 1 of 2

TECHNICAL DATA

Product Description:
- Maximum Working Load: 30 kN
- Maximum Hoisting Load: 30 kN
- Minimum Lowering Load: 10 kN
- Trim and list of up to 10 and 30 degree respectively for the launching appliance.

REFERENCE DOCUMENTS

Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-39093 NPT30DRA - RESCUE BOAT/LIFERAFT DAVIT (SHST/2020/01161/BUNXU)

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the launching appliance was tested under witnessing


of RINA as per Prototype Test Report dated on 21/Apr./2021.

NOTE

- Materials as stated on the approved drawing are to be delivered with maker's product certificates.

- Installation, on board testing, support to the deck structure shall be accepted by attending surveyor.

- Our review is based on original prototype MED Module B Certificate (No.:MED181120WS/001) issued by RINA, which was expired on 24th Apr. 2026. As informed by the manufacturer, initial condition is kept.

- The previous issued MED Module B Certificate No.:MED181120WS/001 is replaced accordingly.





ATTACHMENT TO
CERTIFICATE No. MED272926WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****