Dual-purpose Spray/Jet Nozzles (Type QLD40AJ, QLD50AJ, and QLD65AJ) for discharging water from the ship’s fire main by using fire hoses.
Type | QLD40AJ | QLD50AJ | QLD65AJ |
Nominal Diameter | 40 mm | 50 mm | 65 mm |
Working Pressure | 6 bar | 6 bar | 6 bar |
Nozzle Diameter | 12 mm | 16 mm | 19 mm | 12 mm | 16 mm | 19 mm | 12 mm | 16 mm | 19 mm |
Flow Rate at Straight Jet (@6 bar) (L/min) | 194 (*)
195 (**) | 245 (*)
246 (**) | 290 (*)
292 (**) | 216 (*)
219 (**) | 318 (*)
320 (**) | 352 (*)
354 (**) | 238 (*)
239 (**) | 390 (*)
392 (**) | 470 (*)
475 (**) |
Effective Throw
(@6 bar) (m) | 25 (*)
26 (**) | 27 (*)
28 (**) | 29 (*)
30 (**) | 25.5 (*)
26 (**) | 30 (*)
32 (**) | 32.5 (*)
33 (**) | 26.5 (*)
27 (**) | 31.5 (*)
32 (**) | 33.5 (*)
34 (**) |
Max. Spray Angle
(6 bar) | > 100° | > 100° | > 100° |
Mass (Kg) | 1.2 | 1.6 | 2.1 |
| Note: *: Data from Technical Parameters **: Data from Test Report |
Dual-purpose type nozzles (Spray/Jet type) to be used in conjunction with hoses for fire fighting purposes on board ships.
The dual-purpose type nozzle may be equipped with fixed couplings as well, if the operability of the nozzle is not impaired.
Each product is to be delivered with its manual for use and maintenance handbook according to EN 15182-1 Ch. 8.1.
Reference Documents
- Technical Drawing (QLD40AJ), approved by RINA with No.: SHFP-26984;
- Technical Drawing (QLD50AJ), approved by RINA with No.: SHFP-26985;
- Technical Drawing (QLD65AJ), approved by RINA with No.: SHFP-26986;
- Marking, approved by RINA with No.: SHFP-26991;
- Technical Specification, filed by RINA with No.: SHFP-26996;
- Technical Parameters, filed by RINA with No.: SHFP-27254;
- Instruction and Maintenance Handbook, filed by RINA with No.: SHFP-27256.
 | ATTACHMENT TO
CERTIFICATE No. MED256324WS
Page 2 of 3 |
Tests Carried Out
Evaluation Test Report issued in compliance with EN 15182-1:2019 & EN 15182-2:2019 and filed by RINA with No.: SHFP-26994.
Remark
The product is to be marked according to EN 15182-1:2019 Ch. 8.2 and in addition with the MED Mark of Conformity, Notified Body No. and the year of manufacturing. For Jet spray angles and adjustment positions, also to be clearly marked.
Each branchpipe shall be delivered with an instruction and maintenance handbook, according to Ch. 8.1.2 & 8.1.3 of EN 15182-1:2019.
Note
Our review and approval is based on previously approved drawings of Dual-purpose Type Nozzles (Spray/Jet), refer to EC Type Examination (Module B) Certificate (Ref No. MED035818WS/013). As declared, manufacturer makes below changes only:
- improve the performance, the sickness of the rubber hardness is increased, thus the Flow Deflector of the fire gun is improved.
- add the nozzle sizes (add the nozzle size of 16mm & 19mm for type QLD40AJ, add the nozzle size of 12mm & 19mm for type QLD50AJ, and add the nozzle size of 12mm & 16mm for type QLD65AJ).
Thus, re-issue the new certificate accordingly.