MED757125WS!002ENGF- -  -  N- N45S -N- S- S- -28/04/2026- Marine Equipment- - SN- S- - N-  - 1,036,901B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED757125WS/002- N-Apr 27, 20311036901
 
Form
  Marine Equipment(TO)
MED399326WS/002,MED645626WS/003,MED694826WS/002,MED796726WS/002,MED931526WS/003
Certification N. MED757125WS/002 - (ENG)
Certificate date 28/04/2026
Type Mezzi di salvataggio
Product Winches for survival craft and rescue boats: (a) davit-launched lifeboats
Item Nº MED/1.41a

Model or Denomin.
Items
N45S
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
Place of requester No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City, Zhejiang Province, China
Tel. N.,Fax, Email 0576-89053360, 0576-89053363, nsy888@norsier.com
Directive (EU) 2025/1533
Standards IMO Res.MSC 81(70) as amended
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/24, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Expire date 27/04/2031
Head Office SHANG HAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED757125WS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.41a
Description Winches for survival craft and rescue boats: (a) davit-launched lifeboats
Type N45S
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City, Zhejiang Province, China
Testing standards IMO Res.MSC 81(70) as amended
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/24, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Issued in SHANG HAI on
This Certificate is valid until
April 28, 2026
April 27, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED757125WS/002
Page 1 of 2

TECHNICAL DATA


Product Description:

- Maximum Working Load: 45 kN


- Maximum Hoisting Load: 24 kN
- Breaking load of wire rope: >=192 kN


REFERENCE DOCUMENTS

Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-60326 N45S/Z Electric Lifeboat/Rescue Boat Winch (SHST/2025/2175/LEIGU).

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the launching appliance was tested under witnessing of RINA as per Prototype Test Report dated on 09/Apr./2026.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.
Installation, on board testing shall be accepted by attending surveyor.




ATTACHMENT TO
CERTIFICATE No. MED757125WS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****