MED006024CS!001ENGD- -  -  N- SIRN ELASTIK T -N- S- S- -09/01/2024- Marine Equipment- - SN- S- - N-  - 922,800B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED006024CS/001- N-Nov 19, 2028922800
 
Form
  Marine Equipment(TO)
MED207524GE/006
Certification N. MED006024CS/001 - (ENG)
Certificate date 09/01/2024
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Item Nº MED/3.18c
USCG Category N° 164.117

Model or Denomin.
Items
SIRN ELASTIK T
Applicant SIRN S.R.L.
Place of requester VIA CASAREGIS 22/1  %  16129 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 586771, 010 542678, genova@sirn.it
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 19/12/2023
Expire date 19/11/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED006024CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.18c
USCG Category Nº 164.117
Description Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type SIRN ELASTIK T
Applicant SIRN S.R.L.
VIA CASAREGIS 22/1,16129 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
January 9, 2024
November 19, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED006024CS/001
Page 1 of 2

Product description



Two-component epoxy-polyurethane adhesive composed of mixture of amines, polyurethane resin, epoxy resin, thixotropic, non-combustible filler and flame retardant.
  • Mass per area (g/m2): 800 ± 5%
  • Thickness (mm): 2
Field of application

As deck finishing material.
The product may be applied to any metallic support and to any non-combustible support.


Tests carried out

Tests as per LAPI Test Laboratory reports No. 027.4IMO080/16, No. 027.4IMO090/16 and No. 027.4IMO100/16 dated 4 February 2016 issued according to:
  • IMO 2010 FTP Code Part 5
  • IMO 2010 FTP Code Part 2
  • ISO 1716: 2010




ATTACHMENT TO
CERTIFICATE No. MED006024CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****