MED414624WS!001ENGD- -  -  N- ISO799-1-S13-L3 to ISO799-1-S91-L3 -N- S- S- -01/09/2024- Marine Equipment- - SN- S- - N-  - 2,327,310B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED414624WS/001- N-Aug 31, 20292327310
 
Form
  Marine Equipment(TO)
MED418124WS/001
Certification N. MED414624WS/001 - (ENG)
Certificate date 01/09/2024
Type Apparecchi di navigazione
Product Pilot ladder
Item Nº MED/4.49

Model or Denomin.
Items
ISO799-1-S13-L3 to ISO799-1-S91-L3
Applicant Qingdao Zhuohan Marine Equipment Co., Ltd.
Place of requester South of the intersection of Xunhushan Road and National Highway 204, Xiaozhuang Community. Xifu Tow Qingdao (Shandong)  % CHINA
Tel. N.,Fax, Email 15762297616, ---, n15762297616@163.com
Directive (EU) 2023/1667
Standards IMO Res.A.1045(27), as amended,ISO 799-1:2019.
Reference Documents Reg. V/23 and Reg. X/3 of SOLAS 74 Convention as amended,IMO Res.A.1045(27), IMO MSC/Circ.1428
Expire date 31/08/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED414624WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Navigation Equipment requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/4.49
Description Pilot ladder
Type ISO799-1-S13-L3 to ISO799-1-S91-L3
Applicant Qingdao Zhuohan Marine Equipment Co., Ltd.
South of the intersection of Xunhushan Road and National Highway 204, Xiaozhuang Community. Xifu Tow Qingdao (Shandong),CHINA
Testing standards IMO Res.A.1045(27), as amended,ISO 799-1:2019.
Reference standards Reg. V/23 and Reg. X/3 of SOLAS 74 Convention as amended; IMO Res.A.1045(27), IMO MSC/Circ.1428
Issued in SHANGHAI on
This Certificate is valid until
September 1, 2024
August 31, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED414624WS/001
Page 1 of 2
PRODUCT DESCRIPTION

- The pilot ladder is assembled with two side ropes on each side continuous from the top of the ladder to the bottom

(sisal rope meeting ISO1181:2004).

- Each step is supported by each side rope.

- Steps:

The four lowest steps are made of rubber material. LXBXH (525x115x25, at thinnest point) mm.

The remaining steps except spreader steps are made of hardwood material. LXBXH (525x115x25 at thinnest point) mm.

The spreader steps are made of hardwood material. LXBXH (1800x115x25, at thinnest point) mm.

- Each side rope has a breaking strength of at least 24 kN.

- Length of ladder: 4~30m

REFERENCE DOCUMENTS

Appr. Dwg. Title


SHST-53015 Pilot Ladders


TESTS CARRIED OUT
- Pilot ladder has been tested in compliance with ISO 799-1:2019, and test report is filed by RINA.

REMARKS


- Each ladder is to be marked in compliance with ISO 799-1: 2019, Par 8.

- Each replacement step is to be marked in compliance with ISO 799-1: 2019, Par 8.





ATTACHMENT TO
CERTIFICATE No. MED414624WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****