MED390624CS!001ENGB- -  -  N- A0 - 1 part square window dim. 2034 x 2034 -N- S- S- -30/10/2024- Marine Equipment- - SN- S- - N-  - 342,694B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED390624CS/001- N-Oct 29, 2029342694
 
Form
  Marine Equipment(TO)
MED390624CS/001
Certification N. MED390624CS/001 - (ENG)
Certificate date 30/10/2024
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
A0 - 1 part square window dim. 2034 x 2034
Applicant Metaalwarenfabriek En Kopergieterij Het Anker B.V.
Place of requester Kaatsbaan 10  %  4209 AD Schelluinen  % NETHERLANDS
Tel. N.,Fax, Email 0031 183 623135, ---, truus@anker-windows.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 02/09/2024
Expire date 29/10/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED390624CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type A0 - 1 part square window dim. 2034 x 2034
Applicant Metaalwarenfabriek En Kopergieterij Het Anker B.V.
Kaatsbaan 10,4209 AD Schelluinen,NETHERLANDS
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 30, 2024
October 29, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED390624CS/001
Page 1 of 2

Product description

Window composed of a single composite pane having maximum clear opening size of 1974 mm in width and 1974 mm in height. The frame is composed of a carbon steel welded profile (8 and 12 mm thick) and a stainless steel glass retaining frame (30 mm wide and 5 mm thick) screwed to the profile. The glass pane compound, having minimum total thickness of 15.5 mm, named MARINE A0 and produced by PYROSWISS, is composed of a glass 8 mm thick, a film layer of PVB 1,53 mm thick, and 6 mm thick glass. A ceramic fibre gasket produced by FRENZEL, having thickness of 3 mm, is fitted between the glass faces and edges, the steel frame and glass retaining frame. Spacers, having dimensions of 20 x 50 mm and thickness of 4 mm, named PROMATECT H, are fitted between the glass lower edge and the steel frame.
The window may also be produced by Naval Suppliers Srl - Zona Industriale 24 - 33049 San Pietro al Natisone (UD) - Italy.
Field of application
Fire resistant A-0 Class window with fire hazard in the outer side of the application (side fitted with pane having thickness of 8 mm).

Reference documents
HET ANKER drawing No. FTW-A0-SQSTR-2020 (2 sheets) dated 3 November 2009 approved on 13 November 2009 with endorsement No. LABS-371.
Tests carried out
Test as per RINA Test Laboratory Report No. 2009CS014733/2 issued on 19 November 2009 according to IMO res. A. 754(18) A.I.




ATTACHMENT TO
CERTIFICATE No. MED390624CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****