MED113126CSENGF- -  -  N- MATERASSO ETNA -N- S- S- -04/03/2026- Marine Equipment- - SN- S- - N-  - 588,937B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED113126CS- N-Mar 3, 2031588937
 
Form
  Marine Equipment(TO)
MED067726NA/001,MED067726NA/002,MED118626NA/001,MED154726NA/001,MED127026NA/001,
MED127026NA/002,MED127026NA/003,MED127026NA/004,MED147126NA/001
Certification N. MED113126CS - (ENG)
Certificate date 04/03/2026
Type Protezione antincendio
Product Componenti per letti
Item Nº MED/3.21
USCG Category N° 164.142

Model or Denomin.
Items
MATERASSO ETNA
Applicant I.B.I.M. s.r.l.
Place of requester Via del Rione Sirignano, 6  %  80121 Napoli (NA)  % ITALY
Tel. N.,Fax, Email 0817577742, 0817577742, commerciale@ibimgroup.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/9, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7
Request 11/02/2026
Expire date 03/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED113126CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.21
USCG Category Nº 164.142
Description Bedding components
Type MATERASSO ETNA
Applicant I.B.I.M. s.r.l.
Via del Rione Sirignano, 6,80121 Napoli (NA),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/9, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7
Issued in Genoa on
This Certificate is valid until
March 4, 2026
March 3, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED113126CS
Page 1 of 2

Product description



Mattress composed of the following layers:

1° layer: fabric art. DAMASCO composed of 70% modacrylic and 30% polyester (mass per area 180 g/m2 ) manufactured by Tessilnova Lombarda Snc;
2° layer: stuffing SOFTBOND R 350 composed of 100% polyester (mass per area 200 g/m2) manufactured by Softex Srl;
3° layer: polyurethane foam art. SHAPING E30 composed of 100% polyurethane (density 30 kg/m3) manufactured by Vefer Spa.

Thickeness range: 90 ÷ 220 mm

Field of application


As bedding components.

Tests carried out

Tests as per RINA Test Laboratory report No. 2010CS014439 dated 16 March 2011 according to IMO Res. A.652(16).




ATTACHMENT TO
CERTIFICATE No. MED113126CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****