ELE536225CSENGB- -  -  N- MD2020 -N- S- S- -14/09/2026- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 840,487Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE536225CS- N-Sep 15, 2031840487
 
Form
  Prodotti Elettrici(TO)
ELE536225CS
Certification N. ELE536225CS - (ENG)
Certificate date 14/09/2026
Type Impianti di Automazione
Product Sistema di rivelazione e segnalazione di incendio

Model or Denomin.
Items
MD2020
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA GRETI DEL VARA 9  %  19020 Follo (SP)  % ITALY
Tel. N.,Fax, Email 0187 599101, 0187 558983, d.dido@microdatasrl.it
Standards IACS UR E27 Rev.1 Cyber Resilience of On-board systems and equipment, RINA Rules for Classification of Ships Pt C, Ch 3,Sec 4 & 5.
Expire date 15/09/2031
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE536225CS
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Fire detection and fire alarm system
Type MD2020
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
VIA GRETI DEL VARA 9
19020 Follo (SP)
ITALY
Reference standards IACS UR E27 Rev.1 Cyber Resilience of On-board systems and equipment, RINA Rules for Classification of Ships Pt C, Ch 3,Sec 4 & 5.
  

 
 
   .   This Certificate is valid until September 15, 2031
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE536225CS
Enclosure - Page 1 of 1
MD2020
Fire Detection System

System Architecture:

Microdata Due MD2020 is a Fire Detection System (FDS) that provides continuous fire and fault monitoring through distributed control units interconnected via detector loops and fiber-optic networks. The system supports alarm management, event logging, and integration with the vessel’s Safety Management System (SMS) through Ethernet and MODBUS interfaces, while continuously supervising communication links and reporting any interruption to ensure high system availability and resilience. The FDS system is based on distributed architecture where different central units are connected by redundant ethernet network to ensure fast and reliable communication among the system.

The FDS system consists of the following hardware components necessary for functioning:

No.
Designation
Description
HW.1
Sensors (up to 10k)
Equipped with microcontrollers and firmware, interconnected with each other and with the control stations.
HW.2
Control Stations
Consisting of embedded computers that collect information received from sensors.
HW.3
LAN Network 1
Redundant Ethernet communication network comprising MOXA managed industrial Ethernet switches and wired copper/fibre-optic communication links for the interconnection of control stations.
HW.4
LAN Network 2
Network for CBS system management by applications not run by control stations.
HW.5
LAN Network 3
Connections with external devices (example: VDR, BAM, MODBUS Clients).
HW.6
LAN Network 4
Segregated maintenance Ethernet network for software update, configuration and log data export of FDS control stations.

Software:

No.
Designation
Description
SW.1
Back – end software
For managing sensor loops and the events received from them which are forwarded to the control stations via LAN network
SW.2
REST / WebSocket
Server for synchronizing events received from sensors and forwarded to control stations connected to the network
SW.3
Front-end software
To view the status of the FDS System

Approval conditions:

In each case of installation on board, the following documentation is to be submitted for approval:

  • Cyber Type Approval of the system
  • CBS Asset Inventory (E27 sec.3.1.1): to be incorporated in Vessel asset inventory (E26 sec.4.1.1)
  • Topology diagrams (E27 sec.3.1.2): enabling system integrator to design security zones and conduits (E26 sec.4.2.1)
  • Test Report (E27 sec.3.1.10) signed by the manufacturer demonstrating that the manufacturer has completed design, construction, testing, configuration and hardening (E27 sec.3.1.5 and sec.5.7)

Any modification on the system that is covered by this Type Approval certificate shall be documented and submitted for approval in each case.

If the changes affect the functionality of the system for which rule requirements apply, a new functional type test may be required, and the Type Approval certificate may have to be renewed. Minor changes are covered by this Type Approval.

Application and Limitation:

The Microdata Due FDS is to be installed according to manufacturer's instructions.

The equipment shall be in areas on board to which physical access can be controlled. Ensure that control stations of the FDS system, the switches and the secure routers are housed in closed cabinets with physical assess available only to authorized personnel.

The Fire Detection System (FDS) is designed, manufactured and configured by Microdata Due for the on board integration by third-party companies with the ship’s SMS (Safety Management System).

Type Approval documentation:

  • Topology Diagrams (RINA Id. ELET/42648)
  • FDS MD2020 Security Configuration Guidelines (RINA Id. ELET/42653)
  • MD2020-Security Capabilities Description (RINA Id. ELET/45083)
  • CBS_asset_inventory_HW_SW (RINA Id. ELET/42655)
  • MD2020 Secure Development Life Cycle (EN) (RINA Id. ELET/42656)
  • Software design and development process (EN) (RINA Id. ELET/42657 and ELET/42658)
  • Software Maintenance Process (EN) (RINA Id. ELET/42659)
  • FDS DEMO Topology Diagram (RINA Id. ELET/42660)
  • FDS MD2020 Test procedure for Security Capabilities (RINA Id. ELET/45084)
  • MD2020 Incident response and recovery plan (EN) (RINA Id. ELET/42649)
  • Control of documents, records and communications (EN) (RINA Id. ELET/42650)
  • FDS MD2020 Test reports for Security Capabilities (test report witnessed) (RINA Id. ELET/42651)

Reference documents:

TAO APP dated 17/02/2026 (RINA Id. ELET/42646)
Offer No. 2025/33974
The documents above-mentioned have been archived in the Leonardo Draw Plus portal under the project:
https://leodrawplus.rina.org/projects/73462/detail
All the documentation received and analysed is under the approval letter ELET/2026/593/CB022.


Genoa September 14, 2026
**** NOTICE: This is NOT an official certificate ****