Product description:
The Explorer4 analyzer is a multi-channel, microprocessor controlled gas detection
system, designed for the continuous monitoring of gas and other parameters, composed by:
Main features:
Case | Rack for 4 – 8 – 16 channels |
Power supply | 12 VDC / 110 – 220 VAC with transformer |
Display | LCD 2x16 digit |
Analog input signals | 2 for each channel (0÷10 V / 4÷20 mA) |
Digital Input signals | RS 232 / Bus / I/O / PC |
Visual alarm | 4 LED for each channel (1 fault and 3 alarm levels) + 1 LED for power |
Output alarms | 4 output for each channel (1 for level)
1 fault relay |
Analog input signals | 2 for each channel (0÷10 V / 4÷20 mA) |
Alarms | 3 levels, from 0 to 100% F.S. Fault and alarm disconnection sensor
3 relays for each channel |
Measure point range | % or ppm - 8bit configurable |
Buzzer Alarm | 1 buzzer activated in case of alarm |
Key pads | 3 multi function keys |
Operative Temperature | -20°C to +55°C |
Humidity | 0% to 95% HR (non-condensate) |
Battery | Optional |
Programming | Languages menu: English, Italian, French, Spanish, German, Portuguese (others on request)
average of the reading time, sampling time, kind of alarm (beeps or continuous) |
Suitable to work in conjunction with:
1001700 102111 RTC 1001 Combustible Gas Sensor Transmitter 0-100%LEL VQ-01 ATEX Z1
1001710 102154 RTC 1002 Combustible Gas Sensor Transmitter 0-100 %LEL VQ-21 PR ATEX Z1
1001760 102302 RTE 1001 Oxigen Sensor Transmitter 0-30%
1001800 102311 RTE 1004 H2S Sensor Transmitter
1001780 102306 RTE 1003 CO Sensor Transmitter
Programming of parameters (gain, offset, full scale, alarm levels (3), fault of the
sensors, etc.) makes it possible to check any measurement detectable with sensors 0÷10 V or 4÷20 mA.
ATTACHMENT TO
CERTIFICATE Nr. MED453121CS
Page 2 of 3
Reference Documents
- Operation / Installation Manual for EXPLORER 4 Gas Sampling System issued December 2007 rev.1.0
- former RINA mod. B MED certificate n° MED272113CS dated 02/05/2016
Test reports:
TesLab Test Report n° 222026E dated 01/03/2022