MED284024CSENGB- -  -  N- FTW-A0-SQ3-2216-212 -N- S- S- -12/07/2024- Marine Equipment- - SN- S- - N-  - 342,694B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED284024CS- N-Jul 11, 2029342694
 
Form
  Marine Equipment(TO)
MED284024CS
Certification N. MED284024CS - (ENG)
Certificate date 12/07/2024
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
FTW-A0-SQ3-2216-212
Applicant Metaalwarenfabriek En Kopergieterij Het Anker B.V.
Place of requester Kaatsbaan 10  %  4209 AD Schelluinen  % NETHERLANDS
Tel. N.,Fax, Email 0031 183 623135, ---, truus@anker-windows.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 12/06/2024
Expire date 11/07/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED284024CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type FTW-A0-SQ3-2216-212
Applicant Metaalwarenfabriek En Kopergieterij Het Anker B.V.
Kaatsbaan 10,4209 AD Schelluinen,NETHERLANDS
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 12, 2024
July 11, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED284024CS
Page 1 of 2

Product description

Window composed of three or more panes having, each, maximum clear size of 678 mm in width and 1494 mm in height. The glass compound is composed of two toughened glasses (manufacturer Veneto Vetro) having, each, thickness of 12 mm and, in between, a PVB layer having thickness of 0.76 mm. The central mullions are composed of steel profiles having depth of 65 mm and thickness of 14 mm; the frame is composed of a steel profile having depth of 120 mm and thickness of 12 mm. The glass retaining frames, fitted on the side exposed to the fire, are composed of steel plates having thickness of 5 mm and width of 35 and 50 mm fixed to the mullions and to the frame by means of M6 screws (pitch of 50 mm). Between the glass faces, the frame and the glass retaining frames, ceramics gaskets (manufacturer Frenzelit), having thickness of 2 mm, are fitted. On the lower side, between the glass edge and the frame, spacers of calcium silicate type PROMATECT H (manufacturer Promat), are fitted. The glass panes are sealed by means of silicone type FIRESTOP 700.
The window may also be produced by Naval Suppliers Srl - Zona Industriale 24 - 33049 San Pietro al Natisone (UD) - Italy.

Field of application
Fire resistant A-0 Class window with fire hazard in the inner side of the application.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents
HET ANKER BV drawing No. FTW-A0-SQ3-2216-1012 dated 24 June 2014 approved on 27 June 2014 with endorsement No. LABS-926.
Tests carried out
Tests as per RINA Test Laboratory Laboratory report No. 2014CS01991/1 issued on 27 June 2014 according to IMO 2010 FTP Code Part. 3 Appendix 2 - A.I - Windows.




ATTACHMENT TO
CERTIFICATE No. MED284024CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****