Single leaf hinged door whose maximum clear opening size is 840 mm wide and 1740 mm high. Door leaf, having dimensions of 886 mm in width, 1786 mm in height and thickness of 83 mm, is composed, moving from the exposed side, of a steel sheet, 2 mm thick, a layer of material named PROMAGUARD ALU having thickness of 10 mm and density of 240 kg/m3, a layer of mineral wool type PAROC Marine Fire Slab 150 having thickness of 25 mm and density of 150 kg/m3, a layer of mineral wool type PAROC Marine Fire Slab 150 having thickness of 40 mm and density of 150 kg/m3 and a steel plate having thickness of 3 mm. The leaf is fitted with a rectangular window having clear light of 300x400 (WxH) mm; the glass compound, type PYROBEL 25 EI 60 (manufacturer AGC) and having total thickness of 26.6 mm, is composed of five panes and, in between, four layers of thermo-expanding gel. The window frame is composed, on both sides, of a steel profile having thickness of 2 mm fixed to the leaf by means of M5 screws. Between glass and frame Superwool X607 gaskets, having dimensions of 20x5 mm is fitted; the glass is sealed by means of silicone type PROMAT SYSTEMGLAS. Inside the leaf, two steel stiffeners having dimensions of 40x4 mm are welded, with pitch of 100 mm, to the steel plate having thickness of 3 mm. The door frame is composed of a L steel plate 8 mm thick fixed to the bulkhead by means of 40 M10x25 mm steel bolts. The door closure is made tight with a gasket fitted in the bended edge on the rabbet which is shielded with a thermo-expanding gasket type PROMASEAL LSK having dimensions of 40x2,5 mm fitted on the perimeter edge leaf. The door is equipped with a lever closing device that acts on 3 points fitted outside leaf and actuated by one handle.
|
ATTACHMENT TO
CERTIFICATE Nr. MED259825CS/001
Page 2 of 3 |
Field of application
Fire resistant A-60 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions tested relevant to the width and height of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf;
- maximum door size tested;
- door used with a fire tested frame design.
Reference documents
Olcese Ricci drawing No. 18901 "WEATHERTIGHT/GASTIGHT DOOR A60 - NEMEA" dated 22 January 2019 approved on 25 January 2019 with endorsement No. LABS-1797.
Tests carried out
Test as per RINA Test Laboratory Report No. 2018CS013799/1 issued on 21 January 2019 according to IMO 2010 FTP Code Part 3. |