MED057624CS!002ENGD- -  -  N- Fanflex 20F-SV/3 Mod. Class A30 -N- S- S- -10/09/2024- Marine Equipment- - SN- S- - N-  - 692,947B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED057624CS/002- N-Sep 9, 2029692947
 
Form
  Marine Equipment(TO)
MED070424MI/003
Certification N. MED057624CS/002 - (ENG)
Certificate date 10/09/2024
Type Protezione antincendio
Product Penetrations through "A" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Item Nº MED/3.26b
USCG Category N° 164.138

Model or Denomin.
Items
Fanflex 20F-SV/3 Mod. Class A30
Applicant BBV TECH SRL
Place of requester VIA PAPA GIOVANNI XXIII, 56  %  20090 Rodano (MI)  % ITALY
Tel. N.,Fax, Email +39 0295328118, 0295328316, ---
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 15/02/2024
Expire date 09/09/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED057624CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.26b
USCG Category Nº 164.138
Description Penetrations through "A" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Type Fanflex 20F-SV/3 Mod. Class A30
Applicant BBV TECH SRL
VIA PAPA GIOVANNI XXIII, 56,20090 Rodano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
September 10, 2024
September 9, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED057624CS/002
Page 1 of 2

Product description


The pipe penetration is carried out by a steel cylinder min. Ø280 mm max. Ø1020 mm , height 165 mm and thickness 5 mm welded on the unexposed side of the deck. A steel pipe min. DN50, thickness 3.18 mm, max. DN800, thickness 5 mm, pass inside the cylinder. On the pipe is welded a steel flange having “L”, Ø external min. 420 mm, max. 1160 mm, height 40 mm and thickness 5 mm. The gap between flange and penetration cylinder is 25 mm . Outside the penetration, on the unexposed side, a steel ring having min. Ø420 mm, max. Ø1160 mm, height 50 mm and thickness 5 mm, is welded on the deck. Inside the penetration on the exposed side, the pipe is insulated for a height of 595 mm from the welded flange on the pipe, by 2 layers of mineral wool having thickness 40 mm and density of 100 kg/m³, named Rockwool PROROX WM 960 with metallic net secured by steel wire. On the exposed side, externally to the up described insulation, for a height of 400 mm starting from the deck, are applied 3 layer of mineral wool thickness 40 mm and density of 100 kg/m³, named Rockwool PROROX WM 960 with metallic net secured by steel wire. On the unexposed side, externally to the cylinder penetration, for a height of 195 mm from the deck, are applied 2 layers of mineral wool having thickness 40 mm and density 100 kg/m³, named Rockwool PROROX WM 960 with metallic net. On the unexposed side, externally to the pipe, for a height of 205 mm from the welded flange, are applied 3 layers of mineral having thickness 40 mm and density 100 kg/m³ named Rockwool PROROX WM 960 with metallic net secured by steel wire. From the flange welded on the pipe and the ring welded on the deck, using inox clamps, are installed a gasket made of HT silicone named BBV Tech srl EVV051501, thickness, thickness 3 mm, density 1300 kg/m³ and one layer of glass fiber cover named rex thermoglas Gewebe 200 - 1300 kg/m².

Field of application

Fire resistant A-30 Class metal pipes penetration through Deck as per below table.
range Ø
min. 50 
max. 800 
thick min. 
3.18  mm
5 mm
Reference documents

BBV-Tech drawing no. 1C-9301 rev. 02 dated 27/02/2024.

Tests carried out

RINA Test Report No. 2024CS01576/1 issued on 20/04/2024 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED057624CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****