MED100222CSENGF- -  -  N- FUTURA -N- S- S- -24/10/2022- Marine Equipment- - SN- S- - N-  - 1,035,551B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED100222CS- N-Oct 23, 20271035551
 
Form
  Marine Equipment(TO)
MED189122VE/001,MED026026VE
Certification N. MED100222CS - (ENG)
Certificate date 24/10/2022
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Item Nº MED/3.18b
USCG Category N° 164.112

Model or Denomin.
Items
FUTURA
Applicant LORELEY SRL
Place of requester VIA VITTIME DEL VAJONT 5  %  31031 Caerano Di San Marco (TV)  % ITALY
Tel. N.,Fax, Email 0423569900, 0423919536, amministrazione@loreleysrl.it
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 07/03/2022
Expire date 23/10/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED100222CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.18b
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Type FUTURA
Applicant LORELEY SRL
VIA VITTIME DEL VAJONT 5,31031 Caerano Di San Marco (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 24, 2022
October 23, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED100222CS
Page 1 of 2

Product description



Painting system composed of two layers:
1st layer: Polyester-based powder coating called ‘RZ246I’ produced by “AKZO NOBLE COATINGS SPA” - Como (thickness 0.105 mm ± 10% and mass per area of 110 g/m2 ± 10%);
2nd layer: Thermal sublimation with paper printed with sublimation inks called ‘DIGISTAR HI-PRO’, produced by “JK GROUPO SPA” – Novedrate (CO) (thickness 0.015 mm ± 5% and mass per area of 20 g/m2 ± 5%).
  • Mass per area (g/m2): 130 ± 10%
  • Thickness (mm): 0.120 ± 10%
Field of application

As finishing material for all exposed interior and concealed or inaccessible surfaces (decorative veneer).
The product may be applied to any metallic support having a thickness ³ 0,45 mm.

On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.

Tests carried out

Tests as per RINA Test Laboratory reports No. 2022CS011002/1 and No. 2022CS011002/2 dated 24 October 2022 issued according to:
  • IMO 2010 FTP Code Part 5;
  • ISO 1716: 2010.




ATTACHMENT TO
CERTIFICATE No. MED100222CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****