MED159223CS!006ENGD- -  -  N- COMPOSITE ROCK WOOL PANEL DZ-L5 -N- S- S- -09/09/2024- Marine Equipment- - SN- S- - N-  - 1,188,607B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED159223CS/006- N-Sep 8, 20291188607
 
Form
  Marine Equipment(TO)
MED014923WS/006
Certification N. MED159223CS/006 - (ENG)
Certificate date 09/09/2024
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
COMPOSITE ROCK WOOL PANEL DZ-L5
Applicant Zhejiang Dingzhen Building Materials Technology Co., Ltd
Place of requester Silin Donggang Industrial Zone, Sanmen County Taizhou  % CHINA
Tel. N.,Fax, Email 18869995999, zhangli@dz576.com, ---
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 04/04/2023
Expire date 08/09/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED159223CS/006

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type COMPOSITE ROCK WOOL PANEL DZ-L5
Applicant Zhejiang Dingzhen Building Materials Technology Co., Ltd
Silin Donggang Industrial Zone, Sanmen County Taizhou,CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
September 9, 2024
September 8, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED159223CS/006
Page 1 of 2

Product description

Lining consisting of panels having maximum height of 2460 mm and maximum width of 600 mm and thickness of 25 mm fitted with minimum 90 mm of air gap from an A Class steel bulkhead. Such panels are composed of two steel sheets (thickness 0.5 mm) and a layer of mineral wool Tianchang KMD New Insualtion Materials Co., Ltd, type KMD-Y having density of 120 kg/m3 and thickness of 24 mm, fitted between the steel sheets and glued to the same by adhesive Shanghai Ningrui Adhesives Science & Technology Development Co., Ltd, type YB2002X 8#. The joints between the panels, on both sides, are made by "L" bending of the edges of the blades with their respective joints. The lining is fitted on the upper side with a "Ω" shaped steel profile with a thickness of 1.2 mm and dimensions of 23x55x25 mm and on the bottom with a ā€œCā€ shaped steel profile with a thickness of 1 mm having dimensions of 25x25x15mm.
Field of application
Fire resisting B-15 Class lining for general application.
Reference documents
Zhejiang Dingzhen Building Material Technology Co., Ltd, drawing No. 262DZ-L5-00-BZ dated 26 November 2022 attached to the Test as per SGS-CSTC Standard Technical Services Co., Ltd. report No. AJFS2303001201FF issued on 30 March 2023 and Zhejiang Dingzhen Building Material Technology Co., Ltd, drawing No. 262DZ-L5-00-JG dated 26 November 2022 identified by No. 2023CS011592/6.
Tests carried out
Test as per SGS-CSTC Standard Technical Services Co., Ltd. report No. AJFS2303001201FF issued on 30 March 2023 according to IMO 2010 FTP Code, as amended.




ATTACHMENT TO
CERTIFICATE No. MED159223CS/006
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****