Pilot ladder with the following main components:
Bridge wood step: Lenght: (525 ± 2)mm - Breadth: (115±2) mm - Height : (57±2) mm, n° 4 holes Ø25 (±1) mm;
Flat wood step: Lenght: (525±2) mm - Breadth: (115±2) mm - Height: (28±1) mm, n° 4 holes Ø25 (±1) mm;
Spreader wood step: Lenght: (1800±2) mm - Breadth: (115±2) mm - Height: (28±1) mm, n° 4 holes Ø25 (±1)mm
Rubber step: Lenght: (535 ± 2) mm - Breadth: (115±2) mm - Height : (77±2) mm, n° 4 holes Ø25 (±1) mm;
Side rope according to ISO1181:2004. Diameter 20 mm - Minimum breaking strenghth: 24kN.
Reference document
Relazione Tecnica REL-C&C-010 Rev.02 issued by Canepa & Campi Srl and approved by RINA with n° CSST 22404
Datasheet material and components filed by RINA with n° CSST22406.
Tests carried out
Test reports n° 2024/CS/01/1327/RSA issued and filed by RINA with n° CSST 22405.
Remarks
The bottom of at least two step of the ladder shall be marked as per ISO 799-1:2019 Par 8.1.
The bottom of each replacement step shall be marked as per ISO 799-1:2019 Par 8.2.
A ladder shall not include more than two replacement steps and one replacement spreader step.
A permanent marking should be provided at regular intervals (e.g. 1 m) throughout the length of the ladder consistent with ladder design, use and maintenance in order to facilitate the rigging of the ladder to the required height.
This certificate supersides and replaces certificate MED258123CS issued on July 13, 2023.