MED469021CSENGB- -  -  N- MBD200 Marine Busbar Device -N- S- S- -16/12/2021- Marine Equipment- - SN- S- - N-  - 0B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED469021CS- N-Dec 15, 20260
 
Form
  Marine Equipment(TO)
MED469021CS
Certification N. MED469021CS - (ENG)
Certificate date 16/12/2021
Type Protezione antincendio
Product Penetrations through "A" Class divisions: (a) electric cable transits
Item Nº MED/3.26a
USCG Category N° 164.138

Model or Denomin.
Items
MBD200 Marine Busbar Device
Applicant STI MARINE FIRESTOP. a division of Specified Technologies Inc.
Place of requester 210 Evans Way  %  08876 Somerville (New Jersey)  % U.S.A.
Tel. N.,Fax, Email +19085268000, ---, jlopes@stimarine.com
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1488
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 13/12/2021
Expire date 15/12/2026
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED469021CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.26a
USCG Category Nº 164.138
Description Penetrations through "A" Class divisions: (a) electric cable transits
Type MBD200 Marine Busbar Device
Applicant STI MARINE FIRESTOP. a division of Specified Technologies Inc.
210 Evans Way,08876 Somerville (New Jersey),U.S.A.
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1488
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
December 16, 2021
December 15, 2026
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED469021CS
Page 1 of 2

Product description



Bus bar transit installed in A-class decks. This transit, having a sheet cutting dimension of diameter 250 mm, is installed on the unexposed side to the fire with a flange fixed by means of 2 clamping bolts through the transit fixed to the exposed side to the fire. A second flange fixed to the first one has 4 threaded pins for the fastening of a pre-assembled device with zip and toggle latch on the unexposed side to the fire. In the deck transit is installed a busbar type Canalis KTA 1000 Busbar Assembly (Schneider Electric) having dimensions of 104 mm x 140 mm. Inside the pre-assembled device is provided the following insulation: one endothermic mat with aluminum foil facing named STI Marine FyreWrap E-Wrap Marine (LBP), density 512 kg/m3, having diameter 125 mm, cut into 4 sections and oriented perpendicularly to busbar is fitted to contour of busbar to seal the inside voids. Four strips of E-Wrap having dimensions of 104 x 415 mm are fitted on each busbar cavity, oriented parallel with busbar abutting the first E-Wrap pad. An additional E-Wrap pad having diameter 159 mm, installed above the first pad, cut into 2 sections oriented perpendicularly to busbar is fitted to contour of busbar and E-Wrap strips.
Field of application

Fire resistant A-0 Class cable transit through decks installed on the unexposed side of the fire.
Reference documents

STI drawing No. STI-3PL-0649 (18 sheets) dated 13 December 2021 approved on 15 December 2021 with endorsement No. LABS-2303.
Tests carried out

Tests as per RINA Test Laboratory Report No. 2021CS014690 issued on 15 December 2021 issued according to Appendix 1 of IMO 2010 FTPC Part 3 - A.IV Cable Transits.




ATTACHMENT TO
CERTIFICATE No. MED469021CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****