MED089125CS!001ENGB- -  -  N- SOMEC FRP W 006 -N- S- S- -13/03/2025- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED089125CS/001- N-Mar 12, 2030162855
 
Form
  Marine Equipment(TO)
MED089125CS/001
Certification N. MED089125CS/001 - (ENG)
Certificate date 13/03/2025
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
SOMEC FRP W 006
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email 04374717,---, dcalderola@somecgroup.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/9,IMO Res. MSC.5(48)-(IGC Code) 3,IMO MSC/Circ.1120,RINA Rules for the certification of Marine Equipment
Request 04/02/2025
Expire date 12/03/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED089125CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type SOMEC FRP W 006
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/9; IMO Res. MSC.5(48)-(IGC Code) 3; IMO MSC/Circ.1120; RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 13, 2025
March 12, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED089125CS/001
Page 1 of 2

Product description

Window, with one or more central posts, having, each glass, maximum overall clear size of 658 mm x 1610 mm (WxH). The glass compound, moving from the exposed side, is composed of a glass type PYRAN S (manufacturer Schott AG - Germany) having thickness of 6 mm, a void space, 15 mm thick and a toughened pane, having thickness of 8 mm, coated with deposited metallic oxides manufactured by Soglass. The central mullions, moving from the unexposed side, are composed of a steel square pipe having dimensions of 70x50x5 mm welded to a steel profile, 15 mm wide, fixed to a stainless steel flat having dimensions of 70x6 mm, by means of stainless steel M6 screws. The frame is composed of a steel profile fixed, by means of stainless steel M6 screws, to a stainless steel flat, fitted on the exposed side, having dimensions of 40x6 mm. Between the glass faces, the frame, the glass retaining frames and the central mullions, gaskets of PAPERSEAL ECO type, are fitted. Between the glass edges, the frame and the central mullions, intumescing strips type ADVINSEAL K, are fitted. Spacers of calcium silicate having dimensions of 25x15x6 mm, are fitted on the lower part between the glass edges and the frame.
Field of application
Fire resistant A-0 Class window with fire hazard on the inner side of the application.
Reference documents
SOMEC drawing No. DI015 dated 17 February 2010 (8 sheets) approved on 18 March 2010 with endorsement No. LABS-411.
Tests carried out
Tests as per RINA Test Laboratory reports Nos. 2010CS01928/1 dated 18 March 2010 and 2010CS01928/2 dated 19 March 2010 issued according to IMO Res. A.754(18) A.I and MSC Circular 727.




ATTACHMENT TO
CERTIFICATE No. MED089125CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****