TECHNICAL DATA
The hose assembly consists of:
Flexible hose manufactured by PARKER HANNIFIN MANUFACTURING SRL, VIA G.B. PIRELLI 6, 22070 VENIANO (CO), type 301SN, designed according to standard EN 853-2SN (RINA type approval certificate MAC241320CS/001), composed by :
|
| Nitrile based synthetic rubber oil resistant |
|
| Two braids of high tensile steel wire |
|
| Black synthetic rubber resistant to oils and weathering |
|
| Parker 48 series |
provided with:
- stainless steel (AISI 304) protective braid.
REFERENCE DOCUMENTS
PARKER HANNIFIN specifications nos. Hs-301SN and HS-K48.
MONTI & BARABINO drawing approved with no. PPVT-17780 on 11/02/2014.
Page 4/8 of MONTI & BARABINO booklet approved with no. MAC-10263 on 22/10/2004.
Test reports nos. 449/04, 450/04 and 486/04 dated 01/06/2004 of LAPI Laboratory.
 | ATTACHMENT TO
CERTIFICATE No. MED058619CS/003
Page 2 of 3 |
FIELD OF APPLICATIONS
Intended for petroleum base hydraulic fluids, lubrication oil, fresh water and compressed air.
Temperatures range: -40 °C / +100 °C, according to EN 853.
Maximum working pressure according to the following table:
ND
mm | Maximum working pressure
N/mm2 |
6,3 | 40 |
8 | 35 |
10 | 33 |
12,5 | 27,5 |
16 | 25 |
19 | 21,5 |
25 | 16,5 |
31,5 | 12,5 |
38 | 9 |
51 | 8 |
TESTS CARRIED OUT
Tests carried out by LAPI Laboratorio Prevenzione Incendi SRL, Via della Quercia 11, Loc. Le Querce, PRATO, according to ISO 15540 and ISO 15541, as per Test Reports nos. 449/04, 450/04 and 486/04 dated 01/06/2004.
REMARKS
The steel ties at each end are protected by heat-shrink PVC sleeves (yellow color), in order to avoid damage to the operator at installation. The external protective braid is marked with a thin yellow band, for prompt identification.