Steering angle converter type Argometer RA.01
Main features:
Resistance to Voltage converter for driving up to 10 indicating instruments (full scale range ±1Vdc)
Input: Potentiometer: 1 to 5 kOhm
Output: ±1V (100 ohm 10mA); 4-20mA (max 400 ohm load)
Zero - Span trimming on the front panel.
Temperature: -20°C to +70°C
Warnings: power supply failure (free voltage contact)
Power supply: 24Vdc +30% -25% ; 1W
Follow-Up Steering gear control module type ARGOMETER SC.01
Main features:
Microprocessor based controller with configurable parameters:
Inputs:
Spade Rudder potentiometer: 1 to 5 kOhm (linear)
Helm Control potentiometer: 1 to 5 kOhm (linear)
Alternative input: +/- 10Vdc
24 Vdc signal for valve control inhibit
Outputs:
Rudder angle position: +/- 1V ; +/-5V; (10mA max); isolated 4-20 mA
Valve control relay outputs: 24Vdc
Proportional controls: +/-10Vdc ( max load 100 Ohm)
RS485 / NMEA protocol for V.D.R.
Service interface for full set-up and configuration: RS232
Warnings / Alarms:
Power supply failure + watch-dog; (free voltage contact)
Low insulation (power supply and I/O) and LED signalling (free contact)
Potentiometers failure and LED signalling (free contact)
Control Relay failure and LED signalling (free contact)
Feedback / Helm Control mismatch (free contact)
Rudder low speed (free contact)
Power supply: 24Vdc +30 % -25%; 3 Watts
Control module front panel is additionally provided with:
Trimming for Zero-Span control Input
Trimming for Zero-Span feedback rudder position
Dead band control
Alarm Module type AL.10
Main features:
Configurable ISA alarm sequence
Input: up to 10 isolated (*) N.C./N.O.
isolated, duplicated ack., reset, test lights push buttons
Output: 10 +10 isolated outputs(*) (optical signalling 24Vdc , 0,6 W max)
1 + 1 isolated outputs (acoustical signalling 24Vdc, 12 W max)
Alarm module is provided with two panels; each panel includes :
- 10 alarm LED
- 1 power supply status LED
- 1 failure LED
- 1 Buzzer
- Acknowledge, Reset, Test Lights & Buzzer push buttons
Warnings / alarms:
Power supply failure and watch dog
(*) isolation is provided for each I/O channel
Power supply : 24 Vdc +30% -25% (45 mA max)