Reference documents:
- Job nr. 2024/XT/01/836
Product Description:
- Watertight hatches: 400 x 400 mm; 600 x 600 mm; 800 x 800 mm.
- See drawings approved with nr. from ISDP-5577 to ISDP-5578.
- If the same construction materials, as per approved a.m. drawings, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 400 and 800 mm and long side between 400 and 800 mm.
- The hatches are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness".
- Hatches suitable for an hydraulic pressure of 2.0 m head.
- Hatches fitted on escape ways are to be operable by both sides (handles are to be permanently fixed).
- Hatches suitable for yachts designed for Commercial use having GT < 500 and fitted to compartments other than the category A machinery space and galley boundaries.
- Hatches suitable for pleasure yachts having any GT and fitted other than the category A machinery space and galley boundaries.
- Hatches suitable for pleasure yachts having GT<= 300.
Fields of application:
- Watertight hatches for "RINA Rules for the Classification of Yachts designed for Commercial Use" and "RINA Rules for the Classification of Pleasure Yachts".