MED096022CSENGD- -  -  N- SEAKING ADULT -N- S- S- -08/04/2022- Marine Equipment- - SN- S- - N-  - 713,784B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED096022CS- N-Apr 7, 2027713784
 
Form
  Marine Equipment(TO)
MED136924ME/006
Certification N. MED096022CS - (ENG)
Certificate date 08/04/2022
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
SEAKING ADULT
Applicant ATLANTIS S.R.L.
Place of requester ZONA INDUSTRIALE S.N.  %  89056 SANTA CRISTINA D'ASPROMONTE (RC)  % ITALY
Tel. N.,Fax, Email 0966 878809, 0966 88144, atlantisitalia@pec.it
Directive (EU) 2021/1158
Standards IMO Res. MSC.81 (70) as amended
Reference Documents SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470.
Request 05/02/2020
Expire date 07/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Giovanni Carratino S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED096022CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/1.4
Description Life jackets
Type SEAKING ADULT
Applicant ATLANTIS S.R.L.
ZONA INDUSTRIALE S.N.,89056 SANTA CRISTINA D'ASPROMONTE (RC),ITALY
Testing standards IMO Res. MSC.81 (70) as amended
Reference standards SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470.
Issued in Genoa on
This Certificate is valid until
April 8, 2022
April 7, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED096022CS
Page 1 of 2

Main characteristics

Inherent buoyant lifejacket for adult with the followings main components:
Components
Type
Manufacturer
Fabric COLIBRI' HD/TH Stefano Mardegan Srl
Buoyancy material CELLU-FOAT SL Sealed Air Packing Srl
Tapes Code 3510/3514/3163 Eurotex Srl
Fasteners STEALTH 20/ STEALTH 30
ITW NEXUS SS 40
National Molding Europe Srl
ITW Nexsus Europe
Stitches ATLASE Atlantis Srl
Whistle DURAFLEX National Molding Europe Srl
Retroreflective tape SOLASFLEX T-ISS
Reference documents

Data sheet SEAKING ADULT, n° ST002/22 Rev.01, issued by Atlantis Srl and approved by RINA with n° CSST 20119;
Material and components booklet issued by Atlantis Srl and filed by RINA with n° CSST 20118;
Material Datasheet for Reference Test Device ATL- 0110-A and ATL-0110-C issued by Atlantis Srl and filed by RINA with n° CSST 17689;
Tests carried out

Water performance test n° WPT/2022/02/483 issued by RINA and filed with n° CSST 20116;
Adult RTD buoyancy tracking and verification, report n° RTD/ATL/01/22, filed by RINA with n° CSST20101;
Laboratory test on lifejacket and RTD buoyancy material issued by RINA Laboratory and filed with n° CSST 4416;
Application/Limitation of use

The lifejacket is approved only for use by adult of weight more than 43 Kg and height more than 155 cm.
The lifejacket may be equipped with the following lifejacket lights:
Mod. CONQUEROR/su by SIC Divisione Elettronica Srl / Mod. LNK-LJ-03A1 by Lonako / Mod.FireLight II by Albatross.
The lifejacket can be equipped with different position indicating lights and retro-reflective materials EC type Approved in compliance with Directive 96/98/EC as amended.
The lifejacket may be equipped with extension belt designed by ATLANTIS S.R.L. to fit persons weighing up to 140 Kg and with a chest girth of up to 1.750 mm.
Remark

This Certificate annuls and replaces the Certificate n° MED38220CS/001.




ATTACHMENT TO
CERTIFICATE No. MED096022CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****