FABDRAFT!001ENGB- -  -  N- SLABS FOR NORMAL STRENGTH HULL STRUCTURAL STEEL GRADES A - B - D - E AND FOR HIGHER STRENGTH HULL STRUCTURAL STEEL GRADES AH32 - DH32 - EH32 - AH36 - DH36 -EH36 -AH40 - DH40 - EH40  -N- N- N- -03/09/2024- Fabbricanti Approvati- - NN- N- - S-  - 1,066,068BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FABDRAFT/001- N-Jul 17, 20291066068
 
Form
  Fabbricanti Approvati(TO)
FABDRAFT/001
Certification N. FABDRAFT/001 - (ENG)
Certificate date 03/09/2024
Type Approvazione di fabbricanti di materiali
Product Bramme in acciaio strutturale da scafo

Model or Denomin.
Items
SLABS FOR NORMAL STRENGTH HULL STRUCTURAL STEEL GRADES A - B - D - E  AND FOR HIGHER STRENGTH HULL STRUCTURAL STEEL GRADES  AH32 - DH32 - EH32 - AH36 - DH36 -EH36 -AH40 - DH40 - EH40
Standards RINA Rules for the approval of manufacturers of materials
Expire date 17/07/2029
Responsible Office Astrakhan, RINA Russia Survey Station
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB031024XZ
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Hull structural steel slabs
Type SLABS FOR NORMAL STRENGTH HULL STRUCTURAL STEEL GRADES A - B - D - E  AND FOR
HIGHER STRENGTH HULL STRUCTURAL STEEL GRADES  AH32 - DH32 - EH32 - AH36 - DH36
-EH36 -AH40 - DH40 - EH40

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until July 17, 2029
_________________________________
RINA Services S.p.A.
Andrey Ryabushko
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB031024XZ
Enclosure - Page 1 of 1
SLABS FOR NORMAL STRENGTH HULL STRUCTURAL STEEL GRADES A - B - D - E  AND FOR HIGHER STRENGTH HULL STRUCTURAL STEEL GRADES  AH32 - DH32 - EH32 - AH36 - DH36 -EH36 -AH40 - DH40 - EH40

APPROVAL CONDITIONS



Steel making : BOC Basic Oxygen converter - Si - Al killed, fine grain practice
Casting process : CC Continuous casting
Condition of supply: as cast
Dimensions: thickness 200 - 400 mm, width 900 - 2800 mm

The individual Users of the slabs are to be approved for the specific grades of steel they are going to manufacture, for which the relevant supply conditions, fine grain practice and thickness limits will be settled.


General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

Astrakhan, RINA Russia Survey Station September 3, 2024
**** NOTICE: This is NOT an official certificate ****