MED389723CS!001ENGB- -  -  N- YSCF-S TYPE MANUAL FIRE DAMPERS -N- S- S- -04/12/2023- Marine Equipment- - SN- S- - N-  - 1,065,077B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED389723CS/001- N-Dec 3, 20281065077
 
Form
  Marine Equipment(TO)
MED389723CS/001
Certification N. MED389723CS/001 - (ENG)
Certificate date 04/12/2023
Type Protezione antincendio
Product Sbarramenti antincendio
Item Nº MED/3.22
USCG Category N° 164.139

Model
Items/Sizes
YSCF-S TYPE MANUAL FIRE DAMPERS
Applicant JIANGSU YONGSHENG OCEAN ENGINEERING CO., LTD
Place of requester No. 88 Yingjiang East Road, Yongan Town, Gaogang District, Taizhou Jiangsu  % CHINA
Tel. N.,Fax, Email +86052387533622, +86052387537111, 13004455446@163.com
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 31/10/2023
Validity 03/12/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED389723CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.22
USCG Category Nº 164.139
Description Fire dampers
Type YSCF-S TYPE MANUAL FIRE DAMPERS
Applicant JIANGSU YONGSHENG OCEAN ENGINEERING CO., LTD
No. 88 Yingjiang East Road, Yongan Town, Gaogang District, Taizhou Jiangsu,CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
December 4, 2023
December 3, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED389723CS/001
Page 1 of 3

Product description

Round and square manual fire dampers named YSCF-S fixed to the coaming, welded to a deck (item: DN350-D) and to a bulkhead (items: DN400-B, DN400, DN100, 100x100 and 400x400-B), by a flange with M8 steel bolts and 5 mm thick ceramic fiber was padded. The fire dumper frame is composed of steel plate whereas the blades are composed of an hollow profile made by carbon steel sheets or by a single steel plate. The hollow blades are filled with 40 mm of ceramic fiber with a density of 170 kg/m3 (certified non-combustible in compliance with IMO FTP Code). The dumper is fitted with a set of steel manual actuator (DL-CII-4) produced by Ningbo Dongling Plumb & Air-conditioning Parts and Accessories Co., Ltd; the coaming and the damper (including the actuator) are insulated with two layers of ceramic fiber having density of 170 kg/m3 and thickness of 20 mm, (certified non-combustible in compliance with IMO FTP Code). The ceramic fiber, fixed by means of steel pins and washers, are applied, on the coaming, for a minimum length of 450 mm.
Reference documents
Drawings enclosed to FEFTC, Far East Fire Testing Centre, Report No. FT16389 dated 10 October 2016, Report No. FT16390 dated 12 October 2016 and FT16391 dated 13 October 2016.
Tests carried out
Tests as per FEFTC, Far East Fire Testing Centre, Report No. FT16389 iussed on 10 October 2016, Report No. FT16390 iussed on 12 October 2016 and FT16391 issued on 13 October 2016 according to IMO 2010 FTP Code Part. 3 - Annex 1.








 



ATTACHMENT TO
CERTIFICATE Nr. MED389723CS/001
Page 2 of 3


Field of application
Fire resistant A-60 Class fire dampers fitted on decks and bulkheads as per the following tables:

BULKHEADS


DECKS




ATTACHMENT TO
CERTIFICATE No. MED389723CS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****